Advertisement
Quick Links
Advertisement
Related Manuals for A4Tech RFKBS-63A
Summary of Contents for A4Tech RFKBS-63A
- Page 1 R a d i o W i r e l e s s K e y b o a r d U s e r’ s G u i d e Model: RFKBS-63A , RFKB-63A...
- Page 2 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
-
Page 3: Getting Ready
Install the AAA alkaline batteries in the Wireless mouse (for the A4Tech Wireless Desktop). Remove the battery compartment cover on the bottom of the mouse by pressing down on the tab. Insert the batteries as shown in side the battery compartment. - Page 4 Setting Up the Keyboard or Wireless Desktop Make sure that your computer is turned off. Connecting the Receiver’s Keyboard Cable: (a) When connecting to an IBM AT keyboard port, use the 5-pin DIN connector already attached to the keyboard cable. When connecting to a PS/2 -style with adapter, 6-pin DIN keyboard port, it work only for the signal of keyboard..
- Page 5 Click O K and follow the instructions on your screen to complete the installation. Selecting the Frequency Channel The Wireless keyboard and Mouse operates on two frequency channels. To prevent interference when using two RF Mice in close proximity a different frequency channel should be used for each mouse. Refer to the following to change the frequency channel for your keyboard and mouse: Set the frequency channel on the receiver to 1 or 2.
- Page 6 Changing the Wireless Mouse ID Code You can use a new Wireless Mouse on your computer without changing the Radio receiver; you just need to change the ID code. Refer to the following: 1. Press [Shift + Alt + F11] or [Shift + Alt + F12] to call up the Wireless Mouse ID Code window. 2.