Taillamps, Turn Signal; Stoplamps, And Back-Up; Lamps; License Plate Lamp - Chevrolet BOLT EV 2018 Owner's Manual

270 Vehicle Care

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps

1. Back-up Lamp
2. Turn Signal Lamp
3. Stoplamp/Taillamp
To access the bulbs, reach up
behind the rear bumper. To replace
a back-up bulb, turn signal lamp,
taillamp, or stoplamp:
1. Turn the bulb socket
counterclockwise and remove it
from the socket. The lamps are
in the rear bumper.
2. Press the new bulb in and turn
clockwise to install the bulb
into the socket.
3. Turn the bulb socket clockwise
to reinstall.

License Plate Lamp

1. Press the spring clip on the
right end of the lamp assembly
to the left to unlock the lamp
assembly.
2. Pull down on the lamp
assembly to remove it from the
fascia.
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket (1).
6. Push the replacement bulb
straight into the bulb socket (1)
and turn the bulb socket (1)
clockwise to install it into the
lamp assembly (3).
7. Reinstall the lamp assembly (3)
into the fascia by inserting the
left side first.
8. Push the spring clip into place.