Huawei Honor 7X User Manual page 44

1
Open Settings.
2
Touch Wi-Fi > Wi-Fi+ and turn on the Wi-Fi+ switch.
When Wi-Fi+ is enabled, your device will record your Wi-Fi connection history and monitor your
signal strength and location. This information is then used to enable or disable Wi-Fi and
connect to the Wi-Fi network with the strongest signal.
Using a QR code to share your Wi-Fi hotspot
Create a QR code to share your device's Wi-Fi hotspot with friends.
QR codes can be generated for the following wireless encryption methods: WPA, WPA2,
l
WEP, WPA-PSK, and WPA2-PSK. You cannot use a QR code to connect to Wi-Fi
networks that are encrypted using the EAP protocol.
Ensure that the connecting device supports using QR codes to import Wi-Fi network
l
credentials.
1
Go to Settings.
2
Select Wi-Fi and turn on the Wi-Fi switch.
3
Once connected, touch the name of the network to generate a QR code.
4
On the connecting device, touch the centre of the screen and swipe down. Touch
the QR code, and then follow the onscreen instructions to connect to the Wi-Fi hotspot.
Transferring data using Wi-Fi Direct
Wi-Fi Direct lets you transfer data directly between two Huawei devices without connecting to a
Wi-Fi network. Wi-Fi Direct is similar to Bluetooth, but offers faster transfer speeds, making it
suitable for sharing larger files.
Enabling or disabling Wi-Fi Direct
1
Go to Settings.
2
Touch Wi-Fi. Turn on the Wi-Fi switch and then touch
3
Your device will list available Wi-Fi Direct devices. Select the device you want to share files
with and then follow the onscreen instructions to connect.
To disconnect from the receiving device, touch
the receiving device and touch OK.
Using Wi-Fi Direct to send and receive files
First ensure that Wi-Fi Direct is enabled on both devices.
1
Go to Files and touch and hold the image that you want to share.
2
Touch More > Share > Wi-Fi Direct. Your device will list nearby Wi-Fi Direct devices. Select
the receiving device.
.
and go to the Wi-Fi Direct screen. Select
Network and Sharing
, scan
39