RIM 1902G Integrator Manual page 30

Chapter 3: Setting up the Interface and Test Board
To insert the SIM card into the SIM card holder
Warning: To prevent damage to your SIM card, do not scratch or bend the card or expose it to static electricity
or wet conditions.
Note: You must have a SIM card that is authorized for use by the appropriate GPRS network provider. The
authorization must also allow access to the Access Point Name (APN) that will be targeted.
1. Turn the test board over to reveal the cut-out that provides access to the SIM card holder on the
underside of the radio modem.
Underside of the test board showing the on-board SIM card holder
2. Slide the SIM card holder in the direction of the arrow to unlock it, and then lift the cover open.
30 RIM OEM Radio Modem for GSM/GPRS Wireless Networks