Page 1
CENTRALE DE COMMANDE STEUERUNG 027908 2 9 7 2 3 5 CUADRO DE MANDOS QUADRO DE COMANDO LEO MV D ISTRUZIONI D’USO E DI INSTALLAZIONE INSTALLATION AND USER’S MANUAL INSTRUCTIONS D’UTILISATION ET D’INSTALLATION INSTALLATIONS-UND GEBRAUCHSANLEITUNG INSTRUCCIONES DE USO Y DE INSTALACION INSTRUÇÕES DE USO E DE INSTALAÇÃO...
Page 3
_____ 1) GENERAL OUTLINE SCA alarm [ON] _____ The LEO MV D control panel is supplied by the manufacturer with standard setting. Any Master/slave [OFF] _____ alteration must be set by means of the incorporated display programmer or by means...
2) GENERAL OUTLINE If the contact is closed (N.C.), the barrier opens and remains The LEO MV D control panel is supplied by the manufacturer with standard open until contact opening. setting. Any alteration must be set by means of the incorporated display programmer or by means of universal palmtop programmer.
Page 5
6) CONFIGURATION With the MOOVI 30RMM/50RMM barrier (0) , the following functions The display programmer is used to set all the LEO MV D control panel are not active: functions. - slow down The programmer is provided with three pushbuttons for menu scrolling and - torque setting (the barrier always works at maximum torque).
Page 6
= TIMER input activation WARNINGS In the case where an obstacle is found, the LEO MV D panel stops the door Correct controller operation is only ensured when the data contained in and activates a reverse manoeuvre; at the same time the display shows the the present manual are observed.