Genius Bicycle Terms; Riding Position Settings - Mobiky genius Owner's Manual

GENIUS BICYCLE TERMS

Stem clamp
Carry Handle
Walking position
3
Saddle
Saddle clamp
Stay Clamp
Saddle sheath
Stay Tube
Kickstand
Riding position
Storage position

RIDING POSITION SETTINGS

2
The proper fit of the saddle and the handlebars is very important for safety and
good riding comfort.
Below you will find all the adjustements you need to make to the GENIUS before
riding.
GENERAL INSTRUCTIONS
For a comfortable riding position, the height of the saddle should be adjusted
according to your size.
When seated, straighten your leg until your heel lays on the pedal in its lowest
position.
Saddle adjustment
Unlock the stay clamp
Draw the saddle up to the right position
If it's not high enough and the seat pillar reaches the end, follow the
same procedure with the saddle clamp
Once the saddle is well adjusted, secure the quick releases properly.
Before riding check the saddle is correctly tightened. If it is loose, screw
the quick releases again and lock.
WARNING
Never draw out the seat post beyond
the stamped security line.
Saddle angle adjustment
The saddle angle is already adjusted in the normal way.
The best position is reached when the front pad is 0,5 cm to 1 cm higher than
the rear to prevent it from sliding.
Slacken the nut securing the mounting clip, choose a suitable angle
and re-tighten the nut: torque 13NM. Use an Alen key diam. 6 mm.
Check the saddle is correctly tightened. If necessary, screw again.
.
4