Table of Contents
Advertisement
4. Adjust the recording level of the rhythm style and the
mic or instrument.
Set the volume of the rhythm style by turning the
RHYTHM/PLAY knob to the 3 o'clock position. Use the
MIC knob and the (INPUT) 1 and 2 knobs to adjust the
volume level of your mic or instrument accordingly.
Note: In the record-standby state or during recording
(when the [ ] button is blinking or lit), the three LEDs at
the left of the display operate as the recording level meter.
Adjust the knobs listed above so that the top LED flickers
occasionally.
To check the recording level of the rhythm style, press the
[
] button and make adjustments while you record.
When you've finished making adjustments, press the
[
] button to stop the rhythm style.
Note: The VOLUME knob does not affect the recording
level. If acoustic feedback occurs, use this knob to lower
the overall volume.
Start recording
1. Take the steps described in "Getting ready to record" on
page 12.
2. Press the [Count Start] button to turn on the count start
function (the button blinks).
Tip: The count start function inserts a two-measure count
after you press the [ ] button before recording starts.
3. Press the [ ] button to enter the record-standby state.
The LEDs above the [ ] button and [
4. Use the [F1] or [F2] button to select the song number that
you want to record.
Note: Select the song number that you selected in step 3 of
"Getting ready to record" on page 12.
5. Press the [
] button.
A two-measure count is sounded, and then recording
starts.
When recording starts, the LEDs above the [ ] button
and [
] button will light up (the [Count Start] button
goes dark).
6. Perform along with the rhythm style.
Tip: If you like, you can initially record just the rhythm
style for which you specified a chain, and overdub
your performance afterward. (See page 3 "1. Mixer
section").
7. When you've finished performing, press the [
button to stop recording.
You can listen to the recorded song in Recorder mode.
(See page 13 "Playing back the recorded performance")
Tip: If the chain contained a stop setting, it stops
automatically.
Using the recorder function
(Recorder mode)
The KR-55 Pro has a built-in recorder that can record a variety
of input sources. You can use this in a variety of ways, such
as for reviewing your own personal practice sessions, or for
keeping a record of your musical ideas.
Here we explain recording in Recorder mode. The content
that you can record differs as follows depending on the mode.
• Rhythm mode: Your performance is recorded along with
the rhythm style playback.
• Recorder mode: Your performance is recorded. Your
performance can also be overdubbed onto the recorded
song data.
• Player mode: Your performance is recorded along with the
playback of the audio file.
Note: The BASS, TREBLE, and ACOUSTAGE effects cannot
be recorded. The REVERB effect applied to the input audio
from the MIC IN, INPUT 1, and 2 jacks can be recorded.
The recorded data is saved on an SD card inserted in the
SD card slot. In order to record, insert the SD card into the
SD card slot before you turn on the power (See page 7
"Inserting or removing an SD card").
Playing back the recorded performance
You'll use Recorder mode to play back the performance that
you recorded on the KR-55 Pro.
] button blink.
1. Press the [RECORDER] button to enter Recorder mode
(the button lights).
2. Use the [F1] or [F2] button to select the song number that
you want to play.
3. Use the RHYTHM/PLAY knob to adjust the playback
volume of the recorded performance.
If you want the recorded sound to play back at the same
volume as when it was recorded, turn the RHYTHM/
PLAY knob all the way to the right.
4. Press the [
5. Press the [
the beginning of the song, press the [VAR] button.
]
Quick Start
] button to start playback.
] button to stop playback. To return to
13
Advertisement
Table of Contents
