Using Real-Time Recording - Radio Shack 735A-E-002A Owner's Manual

Song Memory Function
SONG MEMORY

Using Real-time Recording

With real-time recording, the notes you play on the keyboard
are recorded as you play them.
To record with real-time recording
1
Press the SONG MEMORY button twice to enter
real-time record standby.
• Perform step 2, below, within five seconds after
entering record standby.
• The level meters for tracks 11 through 16 are shown
on the display while the keyboard is in record standby,
so you can easily check which tracks are already
recorded. See "Level Meter Contents During Record/
Edit Standby" on page E-69 for details.
2
Use the number buttons to select a song number
(0 to 4).
Song number
R e c o r d
• The above song number screen remains on the display
for about five seconds.
3
Make the following settings.
• Tone number
• Rhythm number
• Tempo
• MODE button
E-62
START/STOP
4
Press the START/STOP button to start recording.
• When recording starts, the REC indicator flashes on
the display. After a few moments the indicator stops
flashing, and remains on the display.
• Real-time recording without a rhythm starts. If you
want to record with a rhythm, press the INTRO/
ENDING 1/2 or VARIATION/FILL-IN 1/2.
5
Play something on the keyboard.
• You can also record Auto Accompaniment chords by
selecting the applicable mode with the MODE button.
• Optional pedal, pitch bend and mudulation
operations are also recorded. See "Track 1 Contents
After Real-time Recording".
6
Press the START/STOP button to end recording
when you are finish playing.
• If you make a mistake while recording, you can stop
the record operation and begin over again from step
1, or you can use the editing function (page E-70) to
make corrections.
NOTE
• Using real-time recording to record to a track that already
contains recorded data replaces the previous recording
with the new one.
Number buttons
735A-E-064A