Midi Data - Radio Shack MD-1600 Owner's Manual

42-4043.fm Page 42 Tuesday, August 3, 1999 6:51 AM
To send MIDI data from your keyboard,
use a MIDI cable to connect the MD-
1600's terminal to the other
MIDI OUT
device's MIDI IN terminal.
To receive MIDI data on your keyboard,
use a MIDI cable to connect the MD-
1600's terminal to the other de-
MIDI IN
vice's MIDI OUT terminal.
Note: You do not need to make both
connections if you are only either send-
ing or receiving.

MIDI DATA

Your MD-1600 can send and receive
several different types of MIDI data. The
MD-1600's tones, rhythms, and other
types of MIDI data are sent automatical-
ly as you play.
Notes:
• The MD-1600's
tunes cannot be sent as MIDI data.
• For detailed specifications of the
MIDI function, see the "MIDI Imple-
mentation Chart" on Page 58.
Note On/Off specifies which keys are
pressed (Note On) or released (Note
Off). Also includes how loud a note is
played as a value from 0 to 127.
Notes:
• The pitch of a note depends on the
tone that is being used, as shown in
the "Note Table" on Page 52.
42
• If the keyboard receives a "request"
Program Change specifies the tone.
Pitch Bend supplies pitch bend infor-
mation. A Pitch Bend operation on this
keyboard changes the pitch of the built-
in sound source and sends a Pitch Bend
message through the
Control Change adds effects such as
vibrato and volume changes applied
during keyboard play. The message in-
cludes a control number (the effect type)
and a control value (the on/off and depth
of the effect).
Here is the data that can be sent and re-
ceived with this keyboard and the corre-
sponding control number.
demonstration
Bank Select
Volume
Pan
Expression
Hold1 (Sustain)
Sostenuto
Soft Pedal
RPN (Registered Parameter
Number)
Data Entry
to play notes outside of its range
(higher or lower), it automatically
selects the same note in the nearest
octave.
MIDI OUT
Effect
terminal.
Control
Number
0, 32
7
10
11
64
66
67
100/101
6/38