Correcting Mistakes; Recording Multiple Tracks; Real-Time Recording - Radio Shack MD-1600 Owner's Manual

42-4043.fm Page 37 Tuesday, August 3, 1999 6:51 AM
To enter a rest, press
bers through to specify the length of
1 9
the rest.

Correcting Mistakes

Before finishing your step recording en-
try, you can move the entry point back to
correct the data you entered. However,
this operation deletes all data after the
point where you make corrections.
1. Before you press
to end recording, press
START/STOP
. This moves the entry point back
one "space."
The data recorded at the current
entry point appears on the display.
2. While monitoring the data on the
display, press
entry point to the data you want to
change.
3. At the entry point you want to
change, press
+
time.
Rewrite?
display.
4. Press to clear all data after the
current entry point.
5. Press , , , or
+
rewrite operation. After that, you can
press or to move the entry point
to another location if you want.
Note:
TrackEnd
display if you press
the recording.
then use num-
0
, , or
MEMORY STEP
or to move the
and at the same
–
appears on the
to cancel the
–
appears on the
at the end of
RECORDING MULTIPLE
TRACKS
In addition to the Track 1, where you
record auto accompaniment as well as
keyboard play, there are five other melo-
dy tracks that you can use to record mel-
ody parts only. You can record different
tones on these tracks and build a full en-
semble of instruments.
You can play back what you already re-
corded on Track 1 (or any other track)
while you record on Tracks 2–6.

Real-Time Recording

1. Repeatedly press
appears.
Rec. No.
2. Within 5 seconds, use
select a song number.
3. Press the desired
button ( – ) to select the track you
2 6
want to record on.
Note: Check the display for Chan-
nels 11–16 to see which memory
tracks contain data and which are
empty.
4. If desired, you can change these
settings:
• tone number
• (to a tempo that is easy
TEMPO
for you to follow)
until
MEMORY
or to
+ –
MEMORY TRACK
37