Wall Mounting - Panasonic KX-TGA270S Installation Manual

Charging the battery
Place the handset on the charger and charge for
about 15 hours before initial use.
• The CHARGE indicator lights, a beep sounds and
"Charging" will be displayed.
• Recharge the battery when:
--"Recharge battery"
is displayed,
-,,,r--i]" flashes on the display, or
- the handset beeps intermittently while it is in use.
• If the battery has been discharged, the handset will
display"Charge for ZSHRS" and "_---I" when you
place the handset on the charger. The handset will not
work. Keep charging.
Charge Contacts
Handset battery information
After your Panasonic battery is fully charged:
CHARGE
Indicator
While in use (TALK)
While not in use (Standby)
While using the Reception Booster feature
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
time
Up to 4.5 hours
Up to 11 days
Up to 3.5 hours
Wall Mounting
The charger can be wall mounted. Connect the AC adaptor. Install screws using
the wall template below. Mount the charger (O). Slide it down (_) then slide
down to the right (O) until it is secured.
2.45 cm
Screws
To Power
Outlet