Table of Contents
Advertisement
44
Camera
Save location information to your
pictures and videos
If you sometimes struggle to remember
exactly where you were when you took a
particular picture or video while hiking or
travelling, you can set your device to
automatically record the location. Later,
you can view the locations on a map.
Location information can be attached to
an image or a video clip if location
coordinates can be determined via
network and GPS. If you share an image or
a video clip which has location
information attached, the location
information may be visible to others that
view the image or the video clip. You can
deactivate geotagging in the camera
settings.
Select
Menu
Applications
>
Activate the location recording feature
Select
Options
>
location info
> Yes. The location
information is available only for pictures
taken with the main camera.
It may take several minutes to obtain the
coordinates of your location. The
availability and quality of GPS signals may
be affected by your location, buildings,
natural obstacles, and weather
conditions. If you share a file that includes
location information, also the location
information is shared, and your location
> Camera.
Settings
Save
>
may be visible to third parties viewing the
file. This feature requires network service.
Location information indicators:
— Location information is unavailable.
Location information may not be saved to
pictures or videos.
— Location information is available.
Location information is saved to pictures
or videos.
Take a picture in the dark
To take pictures even when light levels are
low, activate night mode.
Press and hold the camera key.
Activate night mode
1
Select
2
To use the flash, select
portrait. If you do not want to use the
flash, select Night.
Picture and video tips
Press and hold the camera key.
When taking a picture:
Use both hands to keep the camera
•
steady.
When you zoom in, the image quality
•
may decrease.
The camera activates battery saving
•
mode after about a minute of
inactivity. To activate the camera
again, press the camera key briefly.
You can set the user defined scene to
•
be used as the default scene every
time you open the camera. Select
Scene mode
>
defined
> Edit. Modify the settings,
© 2011 Nokia. All rights reserved.
Scene
mode.
>
Night
User
>
Advertisement
Table of Contents
