Setting The Dialing Mode; Using The Belt Clip - Radio Shack ET-548 Owner's Manual

43-1048.fm Page 10 Tuesday, August 17, 1999 12:45 PM
SETTING THE DIALING
MODE
Illustration
Set TONE-PULSE on the side of the base
for the type of service you have. If you are
not sure which type you have, do this sim-
ple test after charging the battery.
1. Set to .
POWER ON
2. Set TONE-PULSE to
3. Lift the remote keypad from the base.
Then press TALK/HANG UP
for a dial tone.
4. Press any number other than 0.
If the dial tone stops, you have touch-
tone service. Leave
to TONE .
If the dial tone continues, you have
pulse service. Set
.
PULSE
10

USING THE BELT CLIP

Use the belt clip to hang the remote key-
pad on your belt or waistband for hands-
free carrying.
TONE .
and listen
set
TONE-PULSE
to
TONE-PULSE
Illustration