Radio Shack ET-545 Owner's Manual page 14

43-1045.fm Page 14 Tuesday, August 17, 1999 10:58 AM
• To enter an at symbol (@),
press then .
0 3
• To enter a space, press
again.
• To enter a dash, press
• To enter an asterisk, press
then .
3
• To enter an exclamation mark,
press then .
3
Notes:
• If you enter a wrong character,
press
FLASH/DEL
last entered character.
• You can enter up to 15 charac-
ters, including spaces. If you try
to enter more than 15 charac-
ters, the phone sounds three
beeps.
4. Press .
MEMORY
appears.
NUMBER
5. Enter the phone number you want
to store. The number appears on
the display.
Notes:
• The phone does not dial the
number while you are storing it.
• If you enter a wrong digit, press
to delete the last
FLASH/DEL
entered digit.
• If you try to enter more than 16
digits, the phone sounds three
beeps.
6. Press again.
MEMORY
appears.
MEMO
14
7. Enter the two-digit memory loca-
then
1 1
then .
1 2
1
8. Pull out the memory index card
to delete the
ENTER TEL
Notes:
SELECT
tion number (01, 02, ... 30) where
you want to store the number. The
index number appears, and two
long beeps sound. The phone
number is now stored in that
memory location.
from the bottom of the base. Write
the person's or company's name
and memory location number on
the sheet in pencil (in case you
want to change it later).
illus
• If you receive a call while you are
storing a number in memory,
press to answer the call.
TALK
After the call, begin again at Step
1 to store the number.
• To change a number stored in
memory, simply store a new num-
ber in that location. To delete a
number, see "Deleting a Number
from Memory" on Page 16.