Table of Contents
Advertisement
43-1037.fm Page 12 Tuesday, August 17, 1999 10:05 AM
PREPARATION
SETTING THE DIALING
MODE
Set
on the back of the
TONE/PULSE
base for the type of service you have
— tone or pulse (rotary). If you are not
sure which type you have, do this test.
1. Set
to
TONE/PULSE
2. Lift the handset, press
listen for a dial tone.
3. Press any number other than
If
your
Note:
requires that you dial an access
code (9, for example) before you
dial an outside number, do not
enter the access code.
If the dial tone stops, you have
touch tone service. Leave
set to
PULSE
TONE
If the dial tone continues, you
have pulse (rotary) service. Set
to
TONE/PULSE
PULSE
12
TURNING THE RINGER
ON OR OFF
To turn off the handset's ringer, set
RINGER OFF/ON
OFF
.
TONE
Note: With the handset's ringer off,
you can still make calls using the
, and
TALK
phone. And you can receive calls if you
have another telephone on the same
line which rings when there is an in-
coming call.
.
0
phone
system
TONE/
.
.
on the handset to
. To turn on the ringer, set it to
ON.
Advertisement
Table of Contents
