Using Tone Services With A Service Number; Using Page - Radio Shack ET-531 Owner's Manual

43-1031.fm Page 13 Tuesday, August 17, 1999 9:24 AM
USING TONE SERVICES
WITH A SERVICE
NUMBER
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Set TONE/PULSE
.
PULSE
2. Dial the service's main number.
3. When the service answers, press
(S). Then dial the additional num-
bers. The phone sends these
numbers as tone signals.
4. When you complete the call, place
the handset on the cradle or press
to disconnect the call. The
TALK
phone automatically resets to the
pulse mode.
Note: We recommend you not use
to dial numbers that include a
DIAL
entry.
TONE

USING PAGE

PAGE
misplaced it, or alert the person hold-
ing the handset. The handset sounds
four beeps when someone presses
PAGE
tor and the selected channel appear on
the base's display.
on the base to
Note: The handset will not beep during
a call, or if the ringer is off.
RE-
lets you locate the handset if you
on the base. The IN USE indica-
13