Table of Contents
Advertisement
PARTS REQUIRED:
8 pcs - H2 Phillips Round Head Screw
2 pcs - P7 Playfield Support Brace
STEP 5:
Attach P7 Playfield Support Braces onto P1 Side Aprons
using pre-drilled pilot holes with H2 Screws as shown
in FIGURE 5.
Tighten, but do not strip out H2 Screws.
4 pcs - H3 Allen Head Bolts
4 pcs - H4 Flat Washer
STEP 6:
Attach P4 Left Legs and P5 Right Legs onto P1 Side Aprons and P2 End Aprons as
shown in FIGURE 6 and DETAIL A.
Secure P4 Left Legs and P5 Right Legs using H3 Allen Head Bolts, H5 Lock Washers
and H4 Flat Washers as shown in FIGURE 6.
Use T1 Allen Wrench to tighten P4 & P5 Legs.
NOTE:
Carefully align the inner locks and push down
on leg to correctly "Lock" the inner lock leg
design.
P5
All Rights Reserved.
© 2016 Escalade Sports
PARTS REQUIRED:
4 pcs - H5 Lock Washer
2 pcs - P4 Left Leg
P1
H4
H5
H3
P4
FIGURE 5
P5
H2
2 pcs - P5 Right Leg
1 pc - T1 Allen Wrench
P4
P2
P5
FIGURE 6
For Customer Service Call 1-888-996-2729
7
P5
H2
NOTE:
Please study this diagram
for correct assembly.
LEG
P4
DETAIL A
NOTE:
Please watch closely that both
male inner locks on the leg are
correctly inside of and locked
into the female counter part.
Advertisement
Table of Contents
