Table of Contents
Advertisement
PARTS REQUIRED:
10 pcs - H1 Phillips Flat Head Screw
1 pc - P1A 10 Logos Graphic Side Apron
1 pc - P1B 11 Logos Graphic Side Apron
1 pc - P2 End Apron
STEP 1:
Find a clean, level place to begin the assembly of
your soccer table. We recommend building the
table on the box top to protect the parts
during assembly.
It is very important to assemble table on
a level and flat surface. This will keep
the end aprons and side aprons
"FLUSH" on the top and bottom edges.
Attach P1A & P1B Side Aprons onto
P2 End Apron using H1 Screws as shown in FIGURE 1.
Tighten, but do not strip out H1 Screws.
IMPORTANT NOTE: Be sure
are screwed "FLUSH" for later Leg assembly.
PARTS REQUIRED:
1 pc - P3 Playfield
STEP 2:
Set P3 Playfield into the grooves in P1A & P1A Side Aprons as shown in FIGURE 2.
NOTE:
Playfield Graphic on
the underside facing the floor
All Rights Reserved.
© 2016 Escalade Sports
H1
H1 Screws
ATTENTION:
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY SET P3 PLAYFIELD INTO THE GROOVES
IN P1 SIDE APRONS.
P1A
FIGURE 2
H1
P1A
FIGURE 1
P3
5
All edges must
be assembled FLUSH
with each other
P2
P1B
NOTE:
All H1 Screws must be
installed flush with cabinet.
P1B
For Customer Service Call 1-888-996-2729
H1
H1
Advertisement
Table of Contents
