Advertisement
USER mode(Video memory equipped model)
■
- USER mode is for the Video Memory module(VMM).
- Enter "USER" mode by pressing the "SET" button in a standby state after power is on.
- If VMM is not installed on your device, when you press the "SET" button, ERROR TONE will ringing.
- USER mode ends automatically and standby mode is on when about 30sec passes without
button input.
- When you are in USER mode, you will not receive any door-phone, extension or interphone call.
EXIT : Ending setup
TIME : VMM Time setting (For time information on the recorded pictures and videos)
SAVE : STILL/VIDEO
DELETE : Delete all STILL or VIDEO les
※ When power is OFF → ON in the middle of changing the con guration on USER mode,
the modi cation may fail to be applied.
14
- Quick Links:
- Installation
Hide quick links:
Advertisement
