Download Print this page

IMODESTY MB810 Instruction Manual

Digital video baby monitor

Advertisement

Quick Links

Warning
Information
*Keep this instruc�on
manual for future
reference.
*For adult use only.
Setup and use your digital video baby monitor
1
Installing Baby Unit
A. Place Baby Unit on a flat
surface, such as a desk or shelf
or mount the camera on a wall.
Never place the baby unit or the
cord within 1 meter of the crib.
B. Connect the small plug of the power adapter to the Baby Unit and the other end to
a suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA). Baby
unit turns on automa�cally.
C. Connec�ng the power supply for the Parent Unit.
Connect the small plug of the power adapter to the parent unit and the other end to
a electrical outlet. Only use the enclosed adapter (5V DC/1000mA).
Recommend charging �me of at least 3 hours before first use.
Precaution: use of battery for
2
Parent Unit
Only charge the battery when the
battery life indicator is low.
Constant recharging of your
battery before the low battery
indicator light comes on will
decrease the life of your batteries.
When ba�ery is low, the power on
off LED (icon) will flash red and on
screen display ba�ery icon will flash
red indica�ng that the ba�ery
needs to be charged.
Function of keys
3
VOX
Parent Unit
Baby Unit
Features and components
4
Sound Level indicator
Visual indicator for sound picked
up from baby unit. The louder
the sound is from Baby unit, the
more LEDs are light on.
VOX on off status
Steady Green: VOX mode is
ac�vated.
Power on off status LED
Steady Green: Parent Unit is powered on.
Steady Orange: Charging ba�ery.
Flash Red: Ba�ery Low
Antenna
Li� up antenna to have be�er
recep�on of audio and video
Kick Stand
Flip out the kick stand and
place the Parent Unit on a
stable, level surface.
MB810 INSTRUCTION MANUAL
WARNING
WARNING
On/Off bu�on
Volume up/down bu�on
Talk bu�on
VOX bu�on
Menu bu�on
Up/Down bu�on
Le�/Right bu�on
Select bu�on
Camera Pan & �lt control
bu�on
Pairing bu�on
Parent Unit
Ba�ery Door
Open the ba�ery door
to change ba�ery.
Gather room temperature informa�on
STRANGULATION HAZARD -
STRANGLED in cords. Keep this cord out of reach of
children (more than 3 feet/1 meter away from the
crib). Never use extension cords with AC adapters.
Only use the AC Adapters provided.
Adult assembly required. Keep small
parts away from children when
assembling.
Press and hold to switch "On/Off" the unit.
Press to increase and decrease volume.
Press and hold to talk to baby unit.
Press to switch on/off VOX (voice ac�va�on mode)
Press to open and exit menu op�ons.
Menu mode (Press to adjust menu se�ngs)
Menu mode (Press to adjust menu se�ngs)
Menu mode (Press to select menu op�on)
Press to ac�ve the pan and �lt func�on.
Press and hold for 3 seconds to ac�vate camera
paring mode for pairing to Parent Unit.
Screen and audio is switched off to save ba�ery energy.
When baby cry loud enough, Screen is switched on to display
baby's audio and video. Baby cry level is adjustable from
Menu se�ng (Sensi�vity Level L, M, H)
Antenna
Camera Antenna
Room Temperature sensor
Children have
1 meter
VOX mode
Baby Unit

Advertisement

loading

Summary of Contents for IMODESTY MB810

  • Page 1 MB810 INSTRUCTION MANUAL Warning STRANGULATION HAZARD - Children have Information STRANGLED in cords. Keep this cord out of reach of *Keep this instruc�on children (more than 3 feet/1 meter away from the manual for future crib). Never use extension cords with AC adapters.
  • Page 2 Special features and menu operation Adjust Parent Unit LCD ADD: Add addi�onal camera. lighter or darker. Step 1: Move the parent unit to the same area as the camera. Both parent and baby unit are switched on. Step 2: Select ADD in Menu. The next available Select and play lullaby in camera will automa�cally be highlighted.
  • Page 3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 4 Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.