Table of Contents
Advertisement
Quick Links
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
STRANGULATION HAZARD - Keep the adapter cord out of baby's reach.
•NEVER place camera or cords within the cot/crib.
•The baby unit and cables should be at least 3 feet/1 meter away from children.
•Secure the cord to the wall to keep cord away from the baby's reach.
•Never use extension cords with AC adapters. Only use the AC adapters provided.
Warning
•This baby monitor is not designed to replace responsibility of human supervision on
children.
•This baby monitor must be assembled and installed by an adult.
•This product is designed for indoor use.
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Clean only with dry cloth.
•Do not use this baby monitor near water.
•Do not install this baby monitor near a heat source.
•Do not cover the baby monitor with a towel or blanket.
•Unplug this apparatus during lightning storms or when unused for long periods of
time.
•The small parts of this baby monitor can be swallowed by babies or small children.
Keep these parts out of reach of children.
•Do not touch the plug contacts with sharp or metal objects.
•Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
•Only use the power adapters provided. Do not use other charges or power adapters
as this may damage the device and battery pack.
Caution
•Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
01
Advertisement
Table of Contents
Related Manuals for IMODESTY MB920T
Summary of Contents for IMODESTY MB920T
-
Page 1: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING! STRANGULATION HAZARD - Keep the adapter cord out of baby’s reach. •NEVER place camera or cords within the cot/crib. •The baby unit and cables should be at least 3 feet/1 meter away from children. •Secure the cord to the wall to keep cord away from the baby’s reach. •Never use extension cords with AC adapters. - Page 2 Specific services instructions and Warranty Terms •Please retain your original dated sales receipt for your records. For warranty service of your baby monitor, you will need to provide a copy of your dated sales receipt to confirm warranty status. For product related questions, please call: •123456789 •123456789 •123456789...
-
Page 3: Product And Accessories
PRODUCT AND ACCESSORIES •Baby unit x1 •Parent unit x1 •Rechargeable Lithium battery x1 •Power adapter for the baby unit x1 (Longer cable one) •Power adapter for the parent unit x1 (shorter cable one) •Screws and extension bolt x2 to mount baby unit on the wall. •User’s guide x1 Overview of the Baby Unit 01.Camera lens... -
Page 4: Overview Of The Parent Unit
Overview of the Parent Unit 01.Menu Key 09.Volume up Normal mode: Normal mode: Press to enter / exit menu Adjust audio level louder Zoom in mode: Zoom in mode: Right arrow to move image to the right Up arrow to move image to the top 02.Talk Key Menu mode: Normal mode:... -
Page 5: Parent Unit Menu Icons
Parent Unit menu icons Battery level (3 levels plus flashing of battery low) Signal strength (4 levels) Talk Mode Night vision mode (Image becomes black/white) VOX mode (Baby and parent unit are in sleep mode while baby sleeps. Baby and parent unit will start streaming video and audio when baby cries. Trigger sensitivity level (3 levels) Brightness level (5 levels) Out of range/Lost link alert... -
Page 6: Getting Started
Getting started Plug in baby unit power adapter •Make sure to use provided (6V 800mA) power adapter, the longer cable one. •Slide the switch to on position to turn on baby unit. Green power LED is turned on. OFF/ON Plug in parent unit power adapter •Make sure to use provided (6V 800mA) power adapter, the shorter cable one. -
Page 7: Operation On Rechargeable Batteries
Operation on rechargeable batteries •The parent unit comes with a rechargeable Li-ion polymer rechargeable battery. •The battery symbol flashes and power LED flash red when battery is empty. •If the battery is completely empty, the parent unit automatically switches off and loses contact with the baby unit. -
Page 8: Using The Baby Monitor
Using the baby monitor Setting up •Place the baby unit in a convenient location where the camera will provide the best view of your baby in their cot/crib. •Place the baby unit on a flat surface. •For optimal sound detection, place the baby unit at least 1 meter (3.5 feet) away from your baby, but no further than 2 meters (7 feet) away. -
Page 9: Talk Mode
Talk mode •Press and hold the TALK key on the parent unit to talk to your baby through baby unit’s speaker. Adjust speaker volume •Press Volume up key to increase volume on parent unit. •Press Volume down key to decrease volume on parent unit. •There are 8 levels for volume level adjustment. -
Page 10: Brightness Adjustment
Brightness adjustment •Press menu key to enter menu mode. •Select “brightness icon” then press “Zoom key” to enter brightness adjustment. •Press volume up key to increase brightness. •Press volume down key to decrease brightness. •There are 5 levels for brightness level adjustment. Auto Mute mode •Auto mute mode is designed to make parent unit completely silent when baby does not cry. - Page 11 VOX mode •VOX mode is designed to reduce RF emission when baby is not crying. This mode also saves the battery life of parent unit. If you select VOX mode on, please also select the desired level of activation sensitivity to activate baby and parent unit when baby needs help.
-
Page 12: Activation Sensitivity Adjustment
Activation Sensitivity adjustment •When you select VOX mode to switch off baby and parent unit, you have to decide a desired level which will activate baby and parent unit again. You do not want to miss the baby crying. •Press Menu key to enter menu mode. -
Page 13: Disposal Of The Device
Disposal of the device •At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and /or box indicates this. •Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. -
Page 14: Ec Declaration Of Conformity
Help Interference •If the signal is weak, try moving the parent and/or baby unit to different positions in the rooms. •Use of other 2.4Ghz devices, such as WIFI router, Bluetooth products or microwave ovens may cause interference with this baby monitor. Please put this baby monitor at least 1 meter(4 feet) from these wireless devices. -
Page 15: Fcc Declaration Of Conformity
FCC Declaration of Conformity FCC ID : 2AAGOMB920T 2AAGOMB920R •Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. •NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.