Using An Optional Handset; Charging The Battery Pack - Radio Shack 43-3529 Owner's Manual

"
CAUTION
You must use a Class 2
power source that supplies
9V DC and delivers at least
210 mA. Its center tip must
be set to positive and its plug
must fit the charger DC IN
9V jack. The supplied
adapter meets these
specifications. Using an
adapter that does not meet
these specifications could
damage the handset or the
adapter.
Always connect the AC
adapter to the charger before
you connect it to AC power.
When you finish, disconnect
the adapter from AC power
before you disconnect it from
the charger.
Ô Ô
NOTE
• If you mounted the base
on the wall, place the
handset with the keypad
facing out.
• You must re-register the
optional handset each
time you change the
original unit's digital
security code.
• If you set CW Deluxe on
the optional handset to
O O O O n n n n
while CIDCW on the
base handset is set to
O O O O f f f f f f f f
, the Caller ID/Call
Waiting information does
not appear on the
optional handset, but you
can still recall and use the
CW Deluxe menu.
30
3. Press # or $ to move the cursor to
"
press
to indicate the record is deleted.
USING AN OPTIONAL
HANDSET
You can add up to eight additional handsets
(Cat. No. 43-3538 [black] or 43-3597 [white],
available from RadioShack) to your system.
C
HARGING THE
The charger is powered
by the supplied 9V, 210
mA AC adapter. Insert the
supplied AC adapter's
barrel plug into the
jack on the back of the
9V
charger. Route the cord
through the strain relief
slot and plug the adapter
into a standard AC Outlet.
" " " "
Be sure you have connected the battery pack as
described in "Connecting and Charging the Battery
Pack" on Page 9. Then place the handset on the
charger. The CHARGE indicator on the charger
lights. T T T T o o o o t t t t a a a a l l l l : : : : 0 0 0 0
while the handset is charging. Ô
The second handset supplied with 43-3598 is
already registered at the factory so you do not need
to register it. Other handset(s) must be registered
before use. To register, simply place the handset on
the base until you hear the confirmation tone. If you
do not hear the confirmation tone, register the
handset again.
You can use the optional handsets in the same way
as the base handset with a few exceptions. The
or
SEL/CH DEL/TRSF
B
ATTERY
DC IN
and H H H H S S S S 2 2 2 2 appear on the display
Y Y Y Y e e e e s s s s . Then
. The phone beeps
P
ACK