Advertisement
3. Push the SodaStream 60 L Carbonator into the Support.
4. Lock the SodaStream 60 L Carbonator into place by pressing the Lever.
• The inner pressure of the Carbonator may make it difficult to press the
lever down. Hold the lever as shown in the illustration on the right, and
then push down.
• If you don't lock the Carbonator into place, the refrigerator won't produce
sparkling water.
• If the Carbonator is not tightly connected to the Regulator, it will leak CO
gas, producing a hiss. If this occurs, repeat Steps 2, 3, and 4, making
sure that the Carbonator is firmly attached and locked into place.
5. Press the Sparkling Maker button 3 seconds to run the Sparkling Making function. Wait about
20 minutes. (the amount of time needed for a medium level of carbonation) while the refrigerator
makes sparkling water.
• To make sparkling water, the refrigerator injects CO
Sparkling Water tank. The water enters the tank through the refrigerator's water supply line.
6. To remove any residual substances that may be in the water, dispense 2 or 3 large glass fulls of
Sparkling Water and empty them into a sink.
For more information about using the Sparkling Water function, see Using the Sparkling Water Function.
DA68-03013B (EN)-06-
.indd 26
from the CO
2
Press 3
seconds
English - 26
2
cylinder into water stored in the
2
2015. 8. 26.
10:00
Advertisement
