Camera Installation - Smartwares C723IP User Manual

2. DC connection
3. Loudspeaker
4. Ethernet port
5. Reset opening
6. Audio connection

4. Camera installation

4.1. Connecting the camera
• Connect the adapter cable to the DC connection of the camera. Then
insert the adapter plug into the power outlet.
• Connect the included ethernet cable to the network port of the camera.
Connect the other end of the ethernet cable to your router. The green
LED on the ethernet port will light up when the camera is connected to
the network. The LED on the front of the camera will also begin flashing.
You can now operate your IP Camera using your smartphone or PC. Go to
section 4.2 for use with smartphone and go to section 4.3 for installation
on your PC.
4.2. Settings for smartphone use
Please note! To use the "Smartwares Cameras" App, you need a
smartphone with internet access.
To set up your camera using Android, go to section 4.2.1. To set up your
camera using iOS, go to section 4.2.2.
4.2.1. Android
• Download the App: "Smartwares Cameras" via Google Play and install it.
• Start the App. The start screen of the app appears.
• Sign up for a HomeWizard EasyOnline account. After successful
registration, you will be automatically logged in. 4.
• Tap the '+' to add your camera. The app should automatically discover
your device. If that is not the case, you can manually enter the camera
DID (located on the back label of the camera).
• Once you select the camera you want to add, you have to specify the
camera password and camera name.
• Go to IP camera settings and tap the IP camera name you wish to set. Tap
the pencil in the upper right corner. 10. Tap the "wifi setting" button and
select your wifi router. Enter your wifi router password.
4.2.2. iOS