HOME NETWERKS 7130-04-BT Manual page 7

NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
4. Install a circular 4 in. duct (not included) and
secure it with duct tape or clamps (neither
included).
Finish ceiling work. Ceiling hole should be aligned
with edge of fan body (A).
BLUETOOTH SPEAKER FAN GRILLE INSTALLATION
®
Housing must be installed flush with ceiling board or the grille mounting spring will not be long
enough to insert into the slots inside the fan housing.
1. Join the connectors for the BLUETOOTH
speaker and power adapter.
2. Attach grille by pinching mounting springs and
insert into narrow rectangular slots in the fan
housing.
Turn on power source.
PAIRING YOUR BLUETOOTH® DEVICE TO THE SPEAKER
1. Turn ON bath fan.
2. To play your personal music files, you need a wireless BLUETOOTH
3. Set your device to a midrange volume before connecting to the speaker.
4. Follow the instructions that came with your BLUETOOTH
search for other BLUETOOTH
Identification Number).
5. From the Home screen, choose Settings > BLUETOOTH
speaker.
Note: While your device can maintain multiple pairing records, it can only connect to one accessory at a
time. This prevents your device from sending your data to the wrong BLUETOOTH
6. Choose the HomeWerks
7. When pairing is complete, you can use the BLUETOOTH
8. Optimal volume setting for the BLUETOOTH
cause sound distortion.
www.homewerksww.com
®
accessories. This may involve entering a passkey or PIN (Personal
®
speaker, and then enter a passkey or PIN (0000) if prompted.
®
®
4
1
2
device to make it discoverable or to set it to
®
, the device searches for HomeWerks
®
speaker to play audio with your device.
®
speaker is 70% or lower. Settings higher than 70% may
7
device.
®
accessory.
®
®