Table of content 1. What’s in the box ? 2. Keyboard quick reference 3. USB mode for Win / IOS / Andriod 4. Install & handling for this keyboard on window PC 5. Install & handling for this keyboard on IOS / Android 6.
3. USB mode for Win / IOS/ Android Step 1 : USB-mode is default in Step 2.5) “Red” LED light flash on “switch off” position Step 2 : under”switch off” position, connect keyboard to a PC, you will Step 3. Press Fn + 2 together see “red”...
4. Install & handling for this Keyboard on Windows PC Step 1. Before start, you have to Step 2. Right-click the Blue tooth check if your computer installed a icon, then select “Add Device” bluetooth receiver. if not, you need to buy one and install it on your computer.
Page 8
Step 4. Turn on the Keyboard and Step 5. As shown below, a set of hold FN+1 key for 5 seconds to numbers would appear on the switch on the bluebooth keyboard screen, please enter those numbers mode. Hold FN+C for another 5 and press “ENTER”...
5. Install & handling for this Keyboard on IOS and Android For IOS Step 1. Turn on your IOS Step 3. Turn on bluebooth function system , and go to -> System prefer- Computer will search and show ences -> Bluetooth. “KSI-B10020”...
Page 10
For Android Step 1. Turn on your Step 3. After turn on bluebooth Android system , and go to function, it will search and show -> Settings -> Bluetooth “KSI-B10020” keyboard. Turn on the bluetooth function. Double click that to connect Step 4.
Protective cover : GAA-XK16701 can - when you “switch off” the Keyboard, the buy seperately by request. Cover default mode will be in USB-mode. made of Latex free silicon material *Specifications will subject to change without notice, Please visit www.gett-asia.com for product update.
7. Cleaning instruction - Ensure the port cover is fully enclosed before any cleaning or wet process to prevent malfunctioning. - Clean the bare keyboard conveniently by dishwashing, wiping, brushing, spraying or dipping it in vinegar-based household cleaner. - Similiar the protective cover can be remove and clean by dishwashing, wiping, brushing, spraying or dipping it in vinegar-based household cleaner.
OF THESE HAZARDOUS COMPONENTS, THE MANUFACTURERS WARRANTY WILL BE VOID. IF YOU ARE UNCERTAIN ABOUT USING YOUR PREFERRED CLEANING AGENT OR DISINFECTANT, YOU CAN CONTACT US AT cs@gett-asia.com** 8. Precautions in handling and Use - Do not dry this keyboard with an appliance or heat source such as a microwave heating , dryers, and radiator.
9. In case of defective batteries - Should fluid leaked from a battery come in contact with skin or clothing, the affected skin should be washed with water immediately. - Should fluid enter the eyes,damage may result. the eyes should be washed with water immediately with follow up medical attention.
Page 15
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §...
Need help?
Do you have a question about the KSI-B10010 and is the answer not in the manual?
Questions and answers