Using the Utility ............1314 Hardware Installation............ Home ..............1314 Before You Start ............Profile ..............1415 DWM-110 WiMAX Utility ..........Information ............1819 Installing the Utility ............Network Search ............. 2021 Accessing the WiMAX Utility (User mode) ....Technical Specifications ..........
D-Link DWM-110, with IEEE 802.16e-2005 standard, is a broadband wireless access (BWA) USB adapter. With simple configurations, you can wirelessly access high-speed Internet via the WiMAX base station (BS) of your Internet service provider (ISP) within its coverage area. Simply plug the D-Link DWM-110 Adapter into your USB, and get started.
Chapter 1 – Product Overview Package Contents • DWM-110 IEEE 802.16e-2005 WiMAX USB Adapter • CD-ROM with User Manual/ WiMAX Utility System Requirements • Computer with: • At least one USB 2.0 port • Windows XP/Vista • WiMAX Utility Features •...
Chapter 2 – Overview Hardware Overview Power LED: A steady green light indicates that the WiMAX Adapter is ready for use. D-Link DWM-110 User Manual...
Chapter 2 – Overview Hardware Installation 1. Find an open USB port. 2. Insert the DWM-110 into the USB port. Note: Make sure that you have installed the WiMAX utility before inserting the adapter into your USB port. The WiMAX utility also includes the WiMAX adapter driver.
The WiMAX Utility helps you to configure the settings of the WiMAX adapter. You may need to get the information from your Internet Service Provider (ISP) in order to connect to the Internet with the WiMAX Adapter. Installing the Utility Double-click on the Setup.exe file and the installation dialog will then box appear. Click Next to proceed. D-Link DWM-110 User Manual...
Page 8
Chapter 3 – DWM Series WiMAX Utility Choose WiMAX Utility’s destination location by clicking Change. If you do not need to change the given default location, click Next. Click Install to start the installation. D-Link DWM-110 User Manual...
Page 9
Launch WiMax Utility (User mode), the software will start after clicking Next. If No launch is selected, the software will not automatically start, and you can go to Start > Programs > D-Link > DWM-110 WiMAX Adapater, and select one of the WiMax Utility modes to start.
Note: If you want to change the EAP type, open up WiMAX Utility (Advanced mode) for configuration. Select Remember my settings to save personal settings for future connection. Click Apply to save your current information. D-Link DWM-110 User Manual...
CINR: Carrier to Interference plus Noise Ratio. Operational: The device has successfully connected to a Frequency: The operating frequency of the BS base station and is ready to use. connection. Idle: The device is in Power Saving mode. D-Link DWM-110 User Manual...
Page 13
Chapter 3 – DWM Series WiMAX Utility The connection flow diagram of the WiMAX Utility (User mode). D-Link DWM-110 User Manual...
Connect/Disconnect Click , located at the top-right of the user interface, to start your WiMAX connection. You will see connected highlighted to its left when connection is established. Click the button again to disconnect. D-Link DWM-110 User Manual...
BS. Consult with a technical staff or the ISP during configuration for this mode. Click Start > Programs > D-Link > DWM-110 WiMAX Adapter > D-Link WiMAX Utility (Advanced mode) to start the utility.
Appendix A – Accessing WiMAX Utility (Advanced Mode) Profile Click to see the Profile page. Click see more settings for the User Profile or Network Profile respectively. D-Link DWM-110 User Manual...
Page 17
Select Remember my settings to save personal settings for future connection. Click Apply to save your current information. Click to go back to the Profile’s main page. D-Link DWM-110 User Manual...
Page 18
Click Export to save your channel list as an INI file. The file can then be used by other devices by clicking Import and selecting the particular file. Click Options to see more settings. Click to go back to the Profile’s main page. D-Link DWM-110 User Manual...
Page 19
Appendix A – Accessing WiMAX Utility (Advanced Mode) Network Profile – Options Select Disable radio to turn off the radio. Select Use FFT 512 to enable FFT 512 point. Click OK to save current settings. D-Link DWM-110 User Manual...
CINR: Carrier to Interference plus Noise Ratio. Operational: The device has successfully connected to a Frequency: The operating frequency of the BS base station and is ready to use. connection. Idle: The device is in Power Saving mode. D-Link DWM-110 User Manual...
Page 21
Appendix A – Accessing WiMAX Utility (Advanced Mode) The connection flow diagram of the WiMAX Utility. D-Link DWM-110 User Manual...
Select a channel located within the Available Channel List and click Connect to connect to a wireless network. Note: The frequencies first need to be configured in the Network Profile page in order to search for its available connection. D-Link DWM-110 User Manual...
Need help?
Do you have a question about the DWM-110 and is the answer not in the manual?
Questions and answers