Comelit ANPR922M3M User Manual
  1. Manuals
  2. Brands
  3. Comelit Manuals
  4. IP Camera
  5. ANPR922M3M
  6. User manual
Comelit ANPR922M3M User Manual

Comelit ANPR922M3M User Manual

3mp lpr ip camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3MP LPR IP CAMERA
ART. ANPR922M3M
Please read this manual thoroughly before use and keep it for future reference

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ANPR922M3M and is the answer not in the manual?

Questions and answers

Related Manuals for Comelit ANPR922M3M

Summary of Contents for Comelit ANPR922M3M

  • Page 1 3MP LPR IP CAMERA ART. ANPR922M3M Please read this manual thoroughly before use and keep it for future reference...

  • Page 2: Table Of Contents

    ANPR922M3M user manual – 1 Contents 1. Webpage Overview ......................4 2. Web Log in ........................... 4 3. Preview ..........................5 3.1 Main stream and Sub-stream Switching ..............5 3.2 Prompt Alarm ......................5 3.3 Timing Recording ....................... 6 3.4 Recording Video Manually ..................
  • Page 3 ANPR922M3M user manual – 1 6.2.3.1 Milestone Server Set ................37 6.2.4 Event Management ..................38 6.2.5 User Management ..................38 6.2.6 System Maintenance ..................38 7. Operation Environment .......................39 7.1 Operation System ......................39 7.2 Browser Compatibility ....................39 Statement These instructions are for guidance only. Detailed features are in accordance with the product.

  • Page 4: Webpage Overview

    ANPR922M3M user manual – 1 Webpage Overview Network camera web page is mainly divided into four parts: preview (picture parameter, adjustment, silk setting), playback (local video playback and remote video playback), checking pictures (scratched picture, motion detection, detector alarming), configuration.

  • Page 5: Preview

    ANPR922M3M user manual – 1 3. Preview 3.1 Main stream and Sub-stream Switching 1.Main stream and sub-stream switching. As is shown in picture 3-1 in the red region, click button to switch into main stream and click button to switch into sub-stream.

  • Page 6: Timing Recording

    ANPR922M3M user manual – 1 (Picture: 3-2) 3.3 Timing Recording Timing recording. As is shown in picture 3-2, set the remote video recording plan in [Configuration]  [Remote Configuration]  [Basic Info]. means remote video is not planned, means time video recording is going on.

  • Page 7: Snapshot Function

    ANPR922M3M user manual – 1 After clicking audio button, it support talk back, you only need to connect with microphone and loudspeaker for IPC as well as for PC. (Note: to enable this feature, verify if your IPC model have audio function) 3.7 Snapshot Function...

  • Page 8: Image Parameter Adjustment Setting

    ANPR922M3M user manual – 1 (Picture: 3-3) 3.10 Image Parameter Adjustment Setting 1. Image parameter adjustment setting, as is shown in picture 3-4, red area. drag the horizontal sliders below Sharpness, corresponding value will appear in the text box and the video image will change correspondingly.

  • Page 9: Watermark Setting

    ANPR922M3M user manual – 1 Day/Night function has color, black and white, external synchronization option. Flashing function has outdoor, 50HZ, 60HZ option. (Note: to enable the features, verify if your IPC model have all the functions) (Picture: 3-4) 3.11 Watermark Setting 1.

  • Page 10: Video Reconnection

    ANPR922M3M user manual – 1 (Picture: 3-5) 3.12 Video Reconnection Video Reconnection: You do not need to refresh the web page because you can re- get the video after network goes back to normal working. Meanwhile when the IPC has an SD card even in network off condition, video will be recorded in the IPC.

  • Page 11: Video Playback

    ANPR922M3M user manual – 1 (Picture: 3-6) 4. Video Playback 4.1 Local Video Playback Local Video Playback. As shown in picture 4-1, click [Playback] on the navigation bar, to jump to the video [Playback] page. The image in red area indicates the remote local video playback.
  • Page 12 ANPR922M3M user manual – 1 (Picture: 4-1) Play button . First check the recorded video file. When there is eligible video file, click [Play] button, to jump directly to the starting part of the video file for playing, as shows in picture 4-2. In the meantime, [Slow Forward], [Fast Forward], [Single...
  • Page 13 ANPR922M3M user manual – 1 Single Frame Play button . This icon represents a single frame play. If you click a single frame, to click once [Single Frame] button to display a single frame of a picture. Snapshot button . This icon indicates snapshot function. During playback, click this button, to snapshot current playback video image and will be saved in a defined snapshot stock path.

  • Page 14: Remote Recording Playback

    ANPR922M3M user manual – 1 (Picture: 4-3) 4.2 Remote Recording Playback 1. Remote Recording Playback. As shown in picture 4-4, click [Playback] on the navigation bar, to jump to the video [Playback] page. The image in red area indicates the remote local video playback.
  • Page 15 ANPR922M3M user manual – 1 (Picture: 4-4) 】represents play, first check the recording video file, 3.Playback operation. Button【 when there is eligible video file, click 【Play】 button, there will be a time buffer. In the meantime, the IPC video file will be downloaded to local, which means in the path set of where the local video files stored.
  • Page 16 ANPR922M3M user manual – 1 8. Single frame play function. represents single frame play. If click single frame, to appear picture with each frame. 9. Snapshot function. represents snapshot. Click [Snapshot] button, will snapshot the video picture, stored in the capture setting path.

  • Page 17: Checking Pictures

    ANPR922M3M user manual – 1 (Picture: 4-6) (Note: to enable this feature, verify if your IPC model have the playback functions) 5. Checking Pictures 5.1. Checking Pictures 1.Picture snapshot query. As shown in picture 5-1, query according to the setting conditions, to demonstrate pictures in compliance with the conditions of the query on the right.

  • Page 18: Setting

    ANPR922M3M user manual – 1 (Picture: 5-1) 2.Remote snapshot query – snapshot type. [Snapshot type] is divided into: All, Timing snapshot, detection snapshot, detector snapshot. When [Snapshot type] is All, click [Query] button, on the right list will show all the snapshot pictures. When [Snapshot type] is Timing snapshot, on the right list will show all the timing set snapshot pictures.

  • Page 19: Local Parameter

    ANPR922M3M user manual – 1 (Picture:6-1) 6.1. Local parameter 6.1.1. Path configuration Path configuration, as picture 6-1-1 shows, set recording file save path and preview snapshot save path. (Picture: 6-1-1) 1.When setting record file save path, click [Browse] button, to pop up choosing file save path message, as picture 6-1-2, choose the save path and folder to save file, click [OK] button, the page will show settled video file path, click [Save] button.

  • Page 20: Local Recording Plan

    ANPR922M3M user manual – 1 (Picture: 6-1-2) 2.When setting the preview snapshot save path, click [Preview] button, will pop up page like picture 6-1-2, choose the save path, click [OK] button, the page will shows the settled down save path, click [Save] button. When local capturing, to store captured pictures in the settings path.

  • Page 21: Remote Configuration

    ANPR922M3M user manual – 1 3. When system recognizes the recording disk is full, system will display “cycling coverage” and “stop recording” for user selection. 3.1. Cycling coverage. When the setting disk is full (less than 500MB), to delete the local recording file on the same camera the day before.

  • Page 22: Basic Information

    ANPR922M3M user manual – 1 6.2.1 Basic Information 6.2.1.1 Basic setting Basic setting, as shown in picture 6-2-1-1, includes Time Zone, Set Time, Enable NTP or not, NTP Server, Pan address, Device ID, Enable UPNP or not, PC Time Syn, OCX Version, IPC Version, IE Version.

  • Page 23: Video Setting

    ANPR922M3M user manual – 1 6.2.1.2 Video Setting Video setting, as shown in picture 6-2-1-2, includes System (Pal, NTSC), Stream Type (Mainstream, Sub-stream), flips, Compression type (H.264), Mode (constant, changeable), Resolution (QCIF, CIF, D1, 720P, 1080P, 1600X1200, 2048X1536), video quality, Stream, I frame interval.

  • Page 24: 3: Remote Recording Plan

    ANPR922M3M user manual – 1 6.2.1.3: Remote Recording Plan Remote recording, as shown in picture 6-2-1-3 (Picture: 6-2-1-3) 1. Remote Enable. Click the check box, then the recording plan will be remotely controlled. The recorded file will be stored in SD card, and user can play back these files in play-back windows.

  • Page 25: Sd Card Management

    ANPR922M3M user manual – 1 5.Copy to. Click the check box from Tuesday to Sunday, then click “Copy to”, to copy the setting of Monday to Tuesday to Sunday. When click select all, to select Tuesday to Sunday automatically (example: first select Monday. Then select Para 1, choose the values, the starting time and the end time, then select Tuesday to Sunday or select all.

  • Page 26: Motion Detection Setting

    ANPR922M3M user manual – 1 (Picture: 6-2-1-6) 3.Format SD card. All contents will be deleted. Click “Format SD card ”, then click “check SD card” like picture 6-2-1-7 shows, the use of the SD card is OK, which means the SD card is formatted.
  • Page 27 ANPR922M3M user manual – 1 (Picture: 6-2-1-8) 1.Setting area. As shown in Pic 6-2-1-9, user can make motion detection for a certain region. (Picture: 6-2-1-9) 2. Enable Motion Detection. Click the check box before the “Enable Detection”, to perform motion detection according to set information.
  • Page 28 ANPR922M3M user manual – 1 click "save" button, and this is the setting of the first recording time period. Then select the value of section 2 of Monday: setting the start time at 08: 00: 00, end time at 12: 00: 00, click "save"...

  • Page 29: Snapshot Setting

    ANPR922M3M user manual – 1 6.2.1.6 Snapshot setting Snapshot setting, as picture 6-2-1-11 (Picture: 6-2-1-11) 1.Enable Snapshot. Select snapshot enable/disable on the top of the screen, camera will snapshots according to snapshot setting. 2.Snapinterval setting. When finish snapinterval set, press [Save] button, camera will...

  • Page 30: 7.Alarmset

    ANPR922M3M user manual – 1 (Picture: 6-2-1-12) 6.2.1.7.Alarmset Alarm input setting, as picture 6-2-1-13) (Picture: 6-2-1-13) 1.Enable Alarm. Select “Enable”, when activate detector alarm, preview screen will shows the front-end alarm information. 2. Alarm output. When selected, output notification will be sent when alarm happens.

  • Page 31: Serial Set

    ANPR922M3M user manual – 1 min 00 sec, end time as 18 hour 00 min 00 sec, press [Save] button, the alarm setting for para 4 of Monday is done. Finally Select Monday and para 4, set start time as 18 hour 00 min 00 sec, end time as 23 hour 59 min 59 sec, press [save] button, the alarm setting for para 4 of Monday is done.

  • Page 32: Network Set

    ANPR922M3M user manual – 1 1.Serial type: RS485 or RS232 2. Baud rate: 2400, 4800, 9600, 115200 3.Serial number: 7/8 4. Stop: 1/2 5. Verification: None/Odd/Even 6. PTZ:PELCO-D, PELCO-P 6.2.2 Network set 6.2.2.1 Network parameters Network parameters. Network setting, PPPOE setting, DDNS setting, E-mail Setting, FTP setting.

  • Page 33: Pppoe Setting

    ANPR922M3M user manual – 1 see any video). 2.Enable DHCP. Enable/disable selectable. When enable DHCP, the IP address, Subnet and Gateway address will became not editable. Then press [Save] button, after finished this setting, use [IPSEARCH] to search the IP address of equipment, DHCP server will give an IP address to equipment.

  • Page 34: Ddns Setting

    ANPR922M3M user manual – 1 and begin to count down. When finsihed reboot system will connect defined PPPOE by dialing, when connection success, a new IP address will automatically give to equipment, then we can use the new IP address to access (note: the new IP address is invisible, so the equipment must be bound by realm name.

  • Page 35: Email Set

    ANPR922M3M user manual – 1 5.DDNS ID. Enter the applied DDNS ID in the DDNS bar, press [Save] button, system will jump to the screen of reboot and begin to count down, when finish reboot, system will login the realm name according to the DDNS ID.

  • Page 36: Ftp Set

    ANPR922M3M user manual – 1 7. Password: Set password in “Password” and click “Save”. When alarm or others triggered, snapshot images will be sent according to the email set. 8. Send E-mail. Set sender’s email address in “Send Email” and click “Save”, when alarm and others triggered, snapshot images will be sent according to the email set.

  • Page 37: Milestone Server Set

    ANPR922M3M user manual – 1 6.2.3 Milestone Server Set 6.2.3.1 Milestone Server Set Milestone Serve Set, as picture 6-2-4-1 below: (Picture: 6-2-4-1) 1.Server IP Address. Type in milestone server’s address (example: if milestone server is installed in a computer with IP address 192.168.0.155, then the server IP address to 192.168.0.155)

  • Page 38: System Maintenance

    ANPR922M3M user manual – 1 (Picture: 6-2-5-1) 1. Levels. Divided into “Manager”, “Maintenance Staff”, “User”. 2. User name. Type in user name in “User Name”. 3. Password. Type in password in “Password”. 4. Confirm. Confirm the password in “Confirm”. (Picture: 6-2-5-2) 6.2.6 System Maintenance...

  • Page 39: Operation Environment

    ANPR922M3M user manual – 1 (Picture：6-2-6-1) 1. Default. Click “Completely” will default the system. 2. Reboot. Click “Sure” will reboot the device. Operation Environment 7.1 Operation System Operation System: Windows XP, Windows7, Windows Server 2003 7.2 Browser Compatibility IE Browser: IE7.0, IE8.0, IE9.0, IE10...

Table of Contents