D-Link DSL-2640/NRU Setup page 6

Step 3:
PPPoE Connection.
1.) Click on Net then
2.) Connections followed by
3.) Add
Step 4:
 Change your
VPI to 8
 Type in your PPP username and password as provided to you by your ISP. Service name is
optional and can therefore be left blank.
MTU: 1492
 Scroll down and enable

NAT and Firewall
not be.
 Click on Save
Document Compiled by Mell Truter- D-Link Africa
and ensure that the VCI is set to 35 (default)
keep alive.
should be enabled by default. Tick the respective radio buttons should it