Advertisement
Control Table, daily use.
Pressing the source button on the Beo4 makes two things happen:
Makes the Beo4 change for control of Apple devices, instead of B&O devices.
E
Press
to power on the Apple Device, if it is powered off.
Sends a socket selection command to your B&O TV or Audio system, making it shift to the input socket at
which your Apple device is connected.
*3
Factory source default is sor f.
*4
Factory default is the socket named a.
Refer to the installation manual if another socket is preferred, like c,K,B or else.
www.oneremote.dk
Apple Everyday Controls
s / f
Enable Apple control *1
O
Select
E
Menu
R
Play/ pause *2
*1 Factory preset. Other sources can be used, refer to installation manual.
*2 Press 6 seconds to power off an Apple device. Press shortly to power on.
ASDF
*4
or the Joystik can be used for positioning.
*3
1
Advertisement
