Lifetime 1602 Owner's Manual page 15

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
NO HARDWARE REQUIRED FOR THIS PAGE
ATTENTION: THIS STEP CANNOT BE REVERSED!
SEC
In order to seat the Poles, strike each end of the Pole very hard fi ve to six
1.4
times on a piece of scrap wood or cardboard. This must be done even if
the Poles cover the slots before seating has occurred.
If the Top and Middle Poles (ALH & ALF) do not completely cover the slots on the
Middle and Bottom Poles (ALF & ALE) after seating, DO NOT COMPLETE ASSEMBLY.
Call our Customer Service Department.
ALH
ALF
ALE
Note: Do not hit your feet with the Pole sections,
!
as serious injury could occur.
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface fi ve to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
15