Subscribe to Our Youtube Channel
Related Manuals for SMART-AVI 4K-WALL
Summary of Contents for SMART-AVI 4K-WALL
- Page 1 4K-WALL User Manual HDMI/DVI Video Wall Controller and 4x4 Switch Matrix. Integrated 2x2 Video Wall Controller and 4x4 Port HDMI, Real Time Switch Matrix with On Screen Display Control & No Software Required. Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131...
- Page 2 Quick Start Guide INTRODUCTION To create a four-screen 2x2 video wall with four HD video inputs, the 4K-Wall video wall controller provides a truly simple plug-and-play hardware solution. With four inputs and four outputs, users can arrange their content in nu- merous ways, providing unique functionality by combining the abilities of a video wall hardware controller and a 4x4 HDMI port Matrix.
- Page 3 TECHNICAL SPECIFICATIONS VIDEO Video Bandwidth Single-link 340MHz [10.2Gbps] Resolution HDTV Up to 1080p PC Resolution Up to 1920 x 1200 Input Video Signal 1.2 volts Input DDC Signal 5 volts Single Link Range 1080p Format HDMI DVI Compliance Single-link DVI-D 2.0 Output Cable Length Up to 20 ft.
- Page 4 APPLICATION DIAGRAM APPLICATIONS • Corporate or Educational Presentations • Corporate Lobbies • Airport Installations • Restaurants • Wall Displays • Entertainment Venues • Digital Signage • Point-of-Sale • Dealer Rooms • Security • Control Rooms • Shopping Centers...
- Page 5 Connect up to 4 HDMI inputs (i.e. PC, Blu-Ray Player, Digital Signage, etc.) to the HDMI INPUT ports of the 4k- Wall using HDMI cables. Connect up to 4 HDTVs to the HDMI OUTPUT ports of the 4k-Wall using HDMI cables for or HDMI-to-DVI adapters for DVI displays.
- Page 6 CONTROL USING THE FRONT PANEL FIGURE: 6-1 To switch to Video Wall Mode: Press the QUAD and MENU buttons simultaneously and then press the de- sired input channel 1, 2, 3, or 4. To switch to Individual Mode: Press the FULL button on the front control panel Press the Output Channel (1, 2, 3, or 4).
- Page 7 The initial display, shown in Figure 7-1 is for selecting the various modes available with the 4K-Wall. The second display, shown in Figure 7-2 is for selecting 1 of 4 inputs or sources. The third display, shown in Figure 7-3 is for selecting 1 of 4 outputs or displays.
- Page 8 The on screen display will disappear after a few seconds of inactivity or you can press MENU to make the on screen display disappear. The 4K-Wall will remain in video wall mode and you can change inputs by pressing the corresponding number button.
- Page 9 The on screen display will disappear after a few seconds of inactivity or you can press MENU to make the on screen display disappear. The 4K-Wall will remain in Individual mode and you can change the displays by pressing the display number button followed by the input number button.
- Page 10 The on screen display will disappear after a few seconds of inactivity or you can press MENU to make the on screen display disappear. The 4K-Wall will remain in Quad mode and you can switch to any of the configura-...
- Page 11 The on screen display will disappear after a few seconds of inactivity or you can press MENU to make the on screen display disappear. The 4K-Wall will remain in PIP mode and you can switch to any of the configura-...
- Page 12 On Screen Display (OSD) gives users great flexibility and ease of use when looking to manage their video wall. It can be operated with the IR Remote Control. IR REMOTE CONTROL The 4K-Wall will only respond to the remote control unit provided in the box. See Figure 12-1. Figure 12-1...
- Page 13 Select the correct COM port on the PC. Use the following connection settings: 115200, N, 8, 1, no flow con- trol. Once the connection is established type ? And hit enter. The 4K-Wall should respond with a version number and a list of commands. See Figure 13-2 for sample PuTTY screens.
- Page 14 USING RS-232 CONTROL (Continued) When you connect to the 4K-WALL to a computer via an RS-232 connection, you will see an opening screen on startup. Below are some examples of RS-232 commands. Type ? To see the Main Menu list of commands.
- Page 15 RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE Smart-AVI RS-232 Protocol 4K-Wall Carriage return is represented in the examples by <CR> The HEX code for carriage return is 0D See Page 5 for an illustration of available modes. All typed characters must be upper case.
- Page 16 TCP/IP CONTROL 4K-WALL TCP/IP control is a feature that allows mode switching and other configurations to be controlled remotely via HTTP or TELNET. Manage the switching functions of your 4x4 matrix with ease from anywhere in the world. You can save input/output configuration presets for easy access. TELNET access provides transpar- ent command control of your 4KWall, perfect for use with automated third-party control software.
- Page 17 Smart-AVI limited warranty is valid in any country where the covered product is distributed by Smart-AVI. Limitations of warranty To the extant allowed by local law, neither Smart-AVI nor its third party suppliers make any other warranty or condition of any kind whether expressed or implied with respect to the Smart-AVI product, and specifically disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular purpose.
- Page 18 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no war- ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant- ability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for inci- dental or consequential damages in connection with the furnishing, performance or use of this material.
Need help?
Do you have a question about the 4K-WALL and is the answer not in the manual?
Questions and answers