Radio Shack Portable Cassette Recorder Owner's Manual page 6

Portable cassette recorder
Hide thumbs Also See for Portable Cassette Recorder:
Table of Contents

Advertisement

14-1128.fm Page 6 Thursday, April 6, 2000 3:24 PM
then
FAST-F/CUE
. Press
REVIEW
to resume playback.
PLAY
• If you hold down
or
FAST-F/CUE
playing, you can hear the tape as
it moves at a faster speed. This
makes it easy to locate a specific
part of a recording. When you
release
REWIND/REVIEW
F/CUE
, the tape plays at its nor-
mal speed.
3. Adjust
and
TONE
SENS
to a comfortable listening
level.
4. To stop playback before the tape
automatically stops, press
.
EJECT
RECORDING
Notes:
• Before you load a cassette tape for
recording, be sure its erase-protec-
tion tabs are in place (see "Prevent-
ing Accidental Erasure" on Page 8).
• The recorder's Automatic Level
Control (ALC) circuit automatically
adjusts the recording level.
has no effect on
UME/VOX SENS
recording.
Using the Built-In Microphone
1. Load a blank cassette tape, or one
you want to record over, into the
cassette compartment.
2. Place the recorder 2 to 3 feet from
the recording source.
3. Set
to
.
VOX
OFF
6
or
REWIND/
then
STOP/EJECT
REWIND/REVIEW
while the tape is
or
FAST-
Using an External Microphone
VOLUME/VOX
You can connect an external micro-
phone (not supplied) with a
to the recorder. Your local RadioShack
store sells a variety of microphones.
STOP/
Note: Connecting an external micro-
phone automatically disconnects the
built-in microphone.
Follow these steps to record using an
external microphone.
VOL-
Operation
4. Press
RECORD
to begin recording.
Both
PLAY
and
RECORD
Note: To temporarily stop recording,
press
. Press
PAUSE
resume recording.
5. The recorder automatically stops
the tape when it reaches the end of
the current side. To stop recording
sooner, press
STOP/EJECT
1. Load a blank cassette tape, or one
you want to record over, into the
cassette compartment.
2. Insert the microphone's plug into the
recorder's
jack.
MIC
Note: If the external microphone
has a separate, smaller plug for
remote operation, insert that plug
into the
jack. Then you can use
REM
the microphone's remote switch to
stop or start the recorder.
lock down.
again to
PAUSE
.
1
/
-inch plug
8

Advertisement

Table of Contents
loading

Table of Contents