Table of Contents
Advertisement
Chapter 1
1) Please inspect the Power Adapter carefully, and make sure
that it is properly connected to a power source.
2) Power on. It will be automatically initialized and the LED
indicators should respond as follows:
a)
The Power LED indicator will light up.
b)
All of the port LED indicators will flash momentarily,
which represents a resetting of the system.
Chapter 2
Complies with IEEE802.3u, IEEE802.3ab standards
8 - Port 10/100/1000Mbps Auto-Negotiation RJ45 ports,
supporting Auto-MDI/ MDIX
Supports IEEE 802.3x flow control for full Duplex mode and
backpressure for Half Duplex mode
Non-Blocking switching architure that forwards and filters
packets at full wire-speed for maximum throughput
MAC address auto-learning and auto-aging
Store and forward switching method
Desktop or Wall mount design
Installation
Features & Specifications
1
Advertisement
Table of Contents
