Show Event Log (H4/U8) - NAiS EBL512 Operating Instructions Manual

Matsushita Electric Works Fire & Security Technology AB
MEW00442
26.8
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U8.
Alternative "A"
Alternative "1"
Write number of events
to be printed,
e.g. "010"
"A"
Rev: -

Show event log (H4/U8)

This is a list of events. Types
be programmed. From this menu, it's also possible to get a print-out.
Each event can be listed:
Via display: See Alternative "A" below.
Via a print-out: See Alternative "1" below.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Show event log
Printout: (1=yes)
When "A" is pushed, an event will be shown in the display,
e.g:
ALARM zone 123 address 45
How many events shall be printed ?
000
How many events shall be printed ?
010
Show event log
Printout: (1=yes)
54
See EBL512 Planning Instructions and Win512.
Operating Instructions EBL512, V1.44.x
54
, number of events in the list, etc. can
ACCEPT? H4
U1
U8
MM-DD HH:MM XX
ACCEPT?
ACCEPT?
U8
78
Comments
According to chapter
"Access", see page 57.
Push "A" for display
presentation or
Push "1" for print-out.
This is a list in which
you can scroll. Push
"Return" to menu U8.
(XX in the example =
control unit number.
XX=99=Win512).
Push "A" to start print-
out. After the last print-
out, menu U8 will be
shown again.
Scroll or push "Return"
to menu H4. Scroll or
push "Return" to logout.