Vitriko XR5i v2 Configuration Manual
  1. Manuals
  2. Brands
  3. Vitriko Manuals
  4. Network Router
  5. XR5i v2
  6. Configuration manual

Vitriko XR5i v2 Configuration Manual

Industrial lan - 2g-3g-4g routers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Industrial LAN - 2G-3G-4 G Router s
VITRIKO
XR5i v2 - ER75i v2 - UR5i v2 - LR77 v2
Mobile Data Experts
Anytime Anything Anywhere
,
,
, but always connected.
www.vitriko.com
CONFIGURATION MANUAL
for v2 routers
Contact
www.vitriko.com
info@vitriko.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XR5i v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vitriko XR5i v2

Summary of Contents for Vitriko XR5i v2

  • Page 1 Industrial LAN - 2G-3G-4 G Router s VITRIKO XR5i v2 - ER75i v2 - UR5i v2 - LR77 v2 Mobile Data Experts Anytime Anything Anywhere , but always connected. www.vitriko.com CONFIGURATION MANUAL for v2 routers Contact www.vitriko.com info@vitriko.com...

  • Page 2: Firmware Version

    Properties and settings of router associated with the GSM connection is not available in indus- trial router XR5i v2. PPPoE configuration item is only available on the industrial router XR5i v2, used to set the PPPoE connection over Ethernet. Manual issued in CZ, November 7, 2014 Contact www.vitriko.com...

  • Page 3: Table Of Contents

    VITRIKO Mobile Data Experts CONTENTS Contents 1 Configuration over web browser 1.1 Secured access to web configuration ......
  • Page 4 VITRIKO Mobile Data Experts CONTENTS 1.28 SMTP configuration ....... . .
  • Page 5 VITRIKO Mobile Data Experts LIST OF FIGURES List of Figures Web configuration ........
  • Page 6 VITRIKO Mobile Data Experts LIST OF FIGURES GRE tunnels configuration ......
  • Page 7 VITRIKO Mobile Data Experts LIST OF TABLES List of Tables Mobile connection ........
  • Page 8 VITRIKO Mobile Data Experts LIST OF TABLES Example IPsec configuration ......Overview GRE tunnels ....... .

  • Page 9: Configuration Over Web Browser

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1. Configuration over web browser Attention! If the SIM card is not inserted in the router, then wireless transmissions will not work. The inserted SIM card must have activated GPRS. Insert the SIM card when the router is switched-off.

  • Page 10: Secured Access To Web Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER After green LED starts to blink it is possible to restore initial settings of the router by press- ing button RST on front panel. If press button RST, configuration is restored to default and it is reboot (green LED will be on).

  • Page 11: Primary Lan

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Maximum packet size that the equipment is able to transmit Rx Data Total number of received bytes Rx Packets Received packets Rx Errors Erroneous received packets...

  • Page 12: Mobile Wan Status

    Table 3: System Information 1.3 Mobile WAN status This item is not available for industrial router XR5i v2. The Mobile WAN menu item contains current information about connections to the mobile network. The first part of this page (Mobile Network Information) displays basic information about mobile network in which the router is operated.

  • Page 13: Mobile Network Information

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Model Type of module Revision Revision of module IMEI IMEI (International Mobile Equipment Identity) number of module ESN (Electronic Serial Number) number of module (for CDMA routers)

  • Page 14: Mobile Wan Status

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER After you place your cursor on the maximum or minimum signal strength, the last time when the router reached this signal strength is displayed. In the middle part of this page is displayed information about transferred data and number of connections for both SIM card (for each period).

  • Page 15: Wifi

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.4 WiFi This item is available only if the router is equipped with a WiFi module. After selecting the WiFi item in the main menu of the web interface, information about WiFi access point (AP) and associated stations is displayed.

  • Page 16: Wifi Scan

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.5 WiFi Scan This item is available only if the router is equipped with a WiFi module. After selecting the WiFi Scan item in the menu of the web interface, scanning of neigh- bouring WiFi networks and subsequent printing of results are invoked.

  • Page 17: Wifi Scan

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 4: WiFi Scan Contact www.vitriko.com info@vitriko.com...

  • Page 18: Network Status

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.6 Network status To view system information about the router operation, select the Network item in the main menu. The upper part of the window displays detailed information about active interfaces:...

  • Page 19: Network Status

    It is possible to read status of connection to mobile network from the network information. If the connection to mobile network is active, then it is in the system information shown as a ppp0 interface. For industrial router XR5i v2, interface ppp0 indicates PPPoE connection. Figure 5: Network status Contact www.vitriko.com...

  • Page 20: Dhcp Status

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.7 DHCP status Information on the activities of the DHCP server can be accessed by selecting the DHCP status item. DHCP status informs about activities DHCP server. The DHCP server provides automatic configuration of devices connected to the network managed router.

  • Page 21: Ipsec Status

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.8 IPsec status Information on actual IPsec tunnel state can be called up in option IPsec in the menu. After correct build the IPsec tunnel, status display IPsec SA established (highlighted in red) in IPsec status information.

  • Page 22: System Log

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER In detecting the status of updates DynDNS record are possible following message: DynDNS client is disabled. Invalid username or password. Specified hostname doesn’t exist. Invalid hostname format. Hostname exists, but not under specified username.

  • Page 23: Lan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 9: System Log Example of logging into the remote daemon at 192.168.2.115: Figure 10: Example program syslogd start with the parameter -r 1.11 LAN configuration To enter the network configuration, select the LAN menu item. ETH network set in Primary LAN configuration, expansion PORT ETH set in Secondary LAN configuration.

  • Page 24: Configuration Of Network Interface

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description IP address Fixed set IP address of network interface ETH. Subnet Mask IP address of Subnet Mask. Bridged no – router is not used as a bridge (default) yes –...

  • Page 25: Topology Of Example Lan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Item Description Enable dynamic If this option is checked, dynamic DHCP server is enable. DHCP leases IP Pool Start Start IP addresses space to be allocated to the DHCP clients. IP Pool End End IP addresses space to be allocated to the DHCP clients.

  • Page 26: Example Lan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 12: Example LAN configuration 1 Example of the network interface with dynamic and static DHCP server: The range of allocated addresses from 192.168.1.2 to 192.168.1.4. The address is allocated 10 minutes.

  • Page 27: Topology Of Example Lan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 13: Topology of example LAN configuration 2 Figure 14: Example LAN configuration 2 Contact www.vitriko.com info@vitriko.com...

  • Page 28: Topology Of Example Lan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the network interface with default gateway and DNS server: Default gateway IP address is 192.168.1.20 DNS server IP address is 192.168.1.20 Figure 15: Topology of example LAN configuration 3 Figure 16: Example LAN configuration 3...

  • Page 29: Vrrp Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.12 VRRP configuration To enter the VRRP configuration select the VRRP menu item. VRRP protocol (Virtual Router Redundancy Protocol) is a technique, by which it is possible to forward routing from main router to backup router in the case of the main router failure.

  • Page 30: Topology Of Example Vrrp Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER If Ping Timeout expires with no answer received then process of testing the active line contin- ues the same way like in the case of standard testing process after first test message answer drops out.

  • Page 31: Mobile Wan Configuration

    1. CONFIGURATION OVER WEB BROWSER 1.13 Mobile WAN configuration This item is not available for industrial router XR5i v2. The form for configuration of a connection to the mobile network can be invoked by select- ing the Mobile WAN item in the main menu of the router web interface.

  • Page 32: Dns Address Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Tips for working with the Mobile WAN configuration form: If the size is set incorrectly, data transfer may not be succeeded. By setting a lower MTU it occurs to more frequent fragmentation of data, which means higher overhead and also the possibility of damage of packet during defragmentation.

  • Page 33: Data Limit Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER ones. Checking can be set separately for two SIM cards or two APNs. As a ping address can be used an IP address for which it is certain that it is still functional and is possible to send ICMP ping (e.g.

  • Page 34: Switch Between Sim Cards Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.13.5 Switch between SIM cards configuration At the bottom of configuration it is possible to set rules for switching between two APN’s on the SIM card, in the event that one SIM card is inserted or between two SIM cards, in the event that two SIM cards are inserted.

  • Page 35: Switch Between Sim Card Configurations

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Switch to backup SIM card when This parameter enables switching to secondary SIM binary input is active switch to card or secondary APN of the SIM card, when binary default SIM card when binary in- input ‘bin0’...

  • Page 36: Dial-In Access Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.13.6 Dial-In access configuration Dial-In access configuration is supported only for these routers: ER75i, UR5, ER75i v2 and UR5 v2. In the bottom part of the window it is possible to define access over CSD connection by Enable Dial-In Access function.

  • Page 37: Mobile Wan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 20: Mobile WAN configuration Contact www.vitriko.com info@vitriko.com...

  • Page 38: Example Of Mobile Wan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER The figure below describes the situation, when the connection to mobile network is con- trolled on the address 8.8.8.8 in the time interval of 60 s for primary SIM card and on the address www.google.com in the time interval 80 s for secondary SIM card.

  • Page 39: Pppoe Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.14 PPPoE Configuration To enter the PPPoE configuration select the PPPoE menu item. If the Create PPPoE con- nection option is selected, the router tries to establish PPPoE connection after switching-on.

  • Page 40: Wifi Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.15 WiFi configuration This item is available only if the router is equipped with a WiFi module. The form for configuration of WiFi network can be invoked by pressing the WiFi item in the main menu of the router web interface.
  • Page 41 VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description HW Mode HW mode of WiFi standard that will be supported by WiFi access point (AP). IEE 802.11b IEE 802.11b+g IEE 802.11b+g+n Channel Channel where the WiFi AP is transmitting BW 40 MHz Option for HW mode 802.11n that allows using of two standard...
  • Page 42 VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description WEP Key 1-4 Items for different four WEP keys WEP key in ASCII format must be entered in quotes and must have the following lengths: –...

  • Page 43: Wifi Konfigurace

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Syslog Level Communicativeness level when system writes to the system log Verbose debugging – the highest level of communicativeness Debugging Informational – default level of communicativeness which is used for writing standard events Notification...

  • Page 44: Wlan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.16 WLAN configuration This item is available only if the router is equipped with a WiFi module. The form for configuration of WiFi network and DHCP server functioning on this network can be invoked by pressing the WLAN item in the main menu of the router web interface.

  • Page 45: Wlan Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Use Enable dynamic DHCP leases item at the bottom of this form to enable dynamic allocation of IP addresses using DHCP server. It is also possible to specify these values: Item...

  • Page 46: Backup Routes

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.17 Backup Routes Using the configuration form on the Backup Routes page can be set backing up primary connection by other connections to internet/mobile network. For each back up connection can be defined a priority.

  • Page 47: Firewall Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 27: Backup Routes 1.18 Firewall configuration The first security element which incoming packets must pass is check of enabled source IP addresses and destination ports. It can be specified IP addresses from which you can remotely access the router and the internal network connected behind a router.

  • Page 48: Filtering Of Incoming Packets

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Item Description Source IP address from which access to the router is allowed Protocol Specifies protocol for remote access: all – access is enabled for all protocols TCP – access is enabled for TCP protocol UDP –...

  • Page 49: Firewall Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Action Type of action: allow – access is allowed deny – access is denied Table 32: Forwarding filtering There is also the possibility to drop a packet whenever request for service which is not in the router comes (check box named Enable filtering of locally destinated packets).

  • Page 50: Topology Of Example Firewall Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the firewall configuration: The router has allowed the following access: from address 171.92.5.45 using any protocol from address 10.0.2.123 using TCP protocol on port 1000 from address 142.2.26.54 using ICMP protocol Figure 29: Topology of example firewall configuration...

  • Page 51: Nat Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.19 NAT configuration To enter the Network Address Translation configuration, select the NAT menu item. NAT (Network address Translation / Port address Translation - PAT) is a method of adjusting the net- work traffic through the router default transcript and/or destination IP addresses often change...

  • Page 52: Topology Of Example Nat Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Enable the following options and enter the port number is allowed remote access to the rou- ter from PPP interface. Item Description Enable remote HTTP access on port If this item field and port number is filled in, then configuration of the router over web interface is...

  • Page 53: Example Nat Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 32: Example NAT configuration 1 In these configurations it is important to have marked choice of Send all remaining incom- ing packets it default server, IP address in this case is the address of the device behind the router.

  • Page 54: Topology Of Example Nat Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the configuration with more connected equipment: Figure 33: Topology of example NAT configuration 2 Figure 34: Example NAT configuration 2 Contact www.vitriko.com info@vitriko.com...

  • Page 55: Openvpn Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER In this configuration equipment wired behind the router defines the address Server IP Ad- dress. The router replies, while PING on address of SIM card. Access on web interface of the equipment behind the router is possible by the help of Port Forwarding, when behind IP ad- dress of SIM is indicating public port of equipment on which we want to come up.
  • Page 56 VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description UDP/TCP port Port of the relevant protocol (UDP or TCP) Remote IP Address IP address of opposite tunnel side (domain name can be used) Remote Subnet...

  • Page 57: Openvpn Tunnels Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Authenticate Mode Sets authentication mode: none – no authentication is set Pre-shared secret – sets the shared key for both sides of the tunnel Username/password – enables authentication using CA Certificate, Username and Password...

  • Page 58: Openvpn Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER The changes in settings will apply after pressing the Apply button. Figure 36: OpenVPN tunnel configuration Contact www.vitriko.com info@vitriko.com...

  • Page 59: Topology Of Example Openvpn Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the OpenVPN tunnel configuration: Figure 37: Topology of example OpenVPN configuration OpenVPN tunnel configuration: Configuration Protocol UDP Port 1194 1194 Remote IP Address 10.0.0.2 10.0.0.1 Remote Subnet 192.168.2.0 192.168.1.0 Remote Subnet Mask 255.255.255.0...

  • Page 60: Ipsec Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.21 IPsec tunnel configuration IPsec tunnel configuration can be called up by option IPsec item in the menu. IPsec tunnel allows protected (encrypted) connection of two networks LAN to the one which looks like one homogenous.
  • Page 61 VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description Encapsulation Mode IPsec mode (according to the method of encapsulation) – You can choose tunnel (entire IP datagram is encapsulated) or trans- port (only IP header).

  • Page 62: Ipsec Tunnel Configuration

    FQDN (e.g. @director.v itriko .c om ) – in front of FQDN must always be @ User FQDN (e.g. director@ vitriko .c om ) The certificates and private keys have to be in PEM format. As certificate it is possible to use only certificate which has start and stop tag certificate.
  • Page 63 VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Random time, after which it will re-exchange of new keys are defined: Lifetime - (Rekey margin + random value in range (from 0 to Rekey margin * Rekey Fuzz/100)) By default, the repeated exchange of keys held in the time range:...

  • Page 64: Ipsec Tunnels Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 39: IPsec tunnels configuration Contact www.vitriko.com info@vitriko.com...

  • Page 65: Gre Tunnels Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the IPSec Tunnel configuration: Figure 40: Topology of example IPsec configuration IPsec tunnel configuration: Configuration Remote IP Address 10.0.0.2 10.0.0.1 Remote Subnet 192.168.2.0 192.168.1.0 Remote Subnet Mask 255.255.255.0 255.255.255.0 Local Subnet 192.168.1.0...

  • Page 66: Gre Tunnels Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Item Description Create Enables the individual tunnels Description Displays the name of the tunnel specified in the configuration form Edit Configuration of GRE tunnel Table 42: Overview GRE tunnels Figure 41: GRE tunnels configuration...

  • Page 67: Gre Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 42: GRE tunnel configuration Example of the GRE Tunnel configuration: Figure 43: Topology of GRE tunnel configuration GRE tunnel Configuration: Configuration Remote IP Address 10.0.0.2 10.0.0.1 Remote Subnet 192.168.2.0 192.168.1.0 Remote Subnet Mask 255.255.255.0...

  • Page 68: L2Tp Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.23 L2TP tunnel configuration L2TP is an unencrypted protocol. To enter the L2TP tunnels configuration, select the L2TP menu item. L2TP tunnel allows protected connection by password of two networks LAN to the one which it looks like one homogenous.

  • Page 69: Topology Of Example L2Tp Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the L2TP Tunnel configuration: Figure 45: Topology of example L2TP tunnel configuration Configuration of the L2TP tunnel: Configuration Mode L2TP Server L2TP Client Server IP Address — 10.0.0.1 Client Start IP Address 192.168.1.2...

  • Page 70: Pptp Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.24 PPTP tunnel configuration PPTP is an unencrypted protocol. To enter the PPTP tunnels configuration, select the PPTP menu item. PPTP tunnel allows protected connection by password of two networks LAN to the one which it looks like one homogenous.

  • Page 71: Topology Of Example Pptp Tunnel Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the PPTP Tunnel configuration: Figure 47: Topology of example PPTP tunnel configuration Configuration of the PPTP tunnel: Configuration Mode PPTP Server PPTP Client Server IP Address — 10.0.0.1 Local IP Address 192.168.1.1...

  • Page 72: Dyndns Client Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.25 DynDNS client configuration DynDNS client Configuration can be called up by option DynDNS item in the menu. In the window can be defined a third order domain registered on server www.dyndns.org.

  • Page 73: Ntp Client Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.26 NTP client configuration NTP client Configuration can be called up by option NTP item in the menu. NTP (Network Time Protocol) allows set the exact time to the router from the servers, which provide the exact time on the network.

  • Page 74: Snmp Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.27 SNMP configuration To enter the SNMP configuration it is possible with SNMP agent v1/v2 or v3 configuration which sends information about the router, eventually about the status of the expansion port CNT or MBUS.

  • Page 75: Snmp Configuration (Mbus Extension)

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Item Description Baudrate Communication speed. Parity Control parity bit: none – data will be sent without parity even – data will be sent with even parity odd – data will be sent with odd parity Stop Bits Number of stop bit.

  • Page 76: Object Identifier For Cnt Port

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Description .1.3.6.1.4.1.30140.2.1.6.0 Binary input BIN2 (values 0,1) .1.3.6.1.4.1.30140.2.1.7.0 Binary input BIN3 (values 0,1) .1.3.6.1.4.1.30140.2.1.8.0 Binary input BIN4 (values 0,1) .1.3.6.1.4.1.30140.2.1.9.0 Binary output OUT1 (values 0,1) Table 56: Object identifier for CNT port...

  • Page 77: Example Of Snmp Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of SNMP settings and readout: Figure 50: Example of SNMP configuration Contact www.vitriko.com info@vitriko.com...

  • Page 78: Example Of The Mib Browser

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 51: Example of the MIB browser It is important to set the IP address of the SNMP agent (router) in field Remote SNMP agent. After enter the IP address is in a MIB tree part is possible show object identifier.

  • Page 79: Smtp Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.28 SMTP configuration To enter the SMTP it is possible configure SMTP (Simple Mail Transfer Protocol) client, which is set by sending emails. Item Description SMTP Server Address IP or domain address of the mail server.

  • Page 80: Sms Configuration

    1. CONFIGURATION OVER WEB BROWSER 1.29 SMS configuration For industrial router XR5i v2 is not available SMS Configuration item. SMS Configuration can be called up by option SMS item in the menu. SMS configuration defines the options for sending SMS messages from the router at different defined events and states of the router.

  • Page 81: Send Sms Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Item Description BIN4 – SMS SMS text messages when activate the binary input on the router. Table 59: Send SMS configuration In the second part of the window it is possible to set function Enable remote control via SMS.

  • Page 82: Send Sms

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Description set out1=0 Set output expansion port XC-CNT on 0 set out1=1 Set output expansion port XC-CNT on 1 set profile std Set standard profile set profile alt1 Set alternative profile 1...

  • Page 83: List Of At Commands

    Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER The following table only lists the commands that are supported by Vitriko ’s routers. For other AT commands is always sent OK response. There is no support for treatment of complex AT commands, so in such a case router sends ERROR response.

  • Page 84: Example Of Sms Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER After powering up the router, at the mentioned the phone number comes SMS in this form: Router (Unit ID) has been powered up. Signal strength –xx dBm. After connect to mobile network, at the mentioned phone number comes SMS in this form: Router (Unit ID) has established connection to mobile network.

  • Page 85: Example Of Sms Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the router configuration for SMS sending via serial interface on the PORT1: Figure 54: Example of SMS configuration 2 Contact www.vitriko.com info@vitriko.com...

  • Page 86: Example Of Sms Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the router configuration for controlling via SMS from every phone numbers: Figure 55: Example of SMS configuration 3 Contact www.vitriko.com info@vitriko.com...

  • Page 87: Example Of Sms Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of the router configuration for controlling via SMS from two phone numbers: Figure 56: Example of SMS configuration 4 Contact www.vitriko.com info@vitriko.com...

  • Page 88: Expansion Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.30 Expansion port configuration Configuring of the expansion ports PORT1 and PORT2 can cause selecting Expansion Port 1 or Expansion Port 2. Item Description Baudrate Applied communication speed. Data Bits Number of data bits.

  • Page 89: Expansion Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER When you select items Use CD as indicator of the TCP connection is activated function indication TCP connection using signal CD (DTR on the router). Description Active TCP connection is on...

  • Page 90: Example Of Expansion Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Example of external port configuration: Figure 58: Example of expansion port configuration 1 Figure 59: Example of expansion port configuration 2 Since firmware 3.0.9 all v2 routers provide a program called getty which allows user to connect to the router via the serial line (router must be fitted with an expansion port RS232!).

  • Page 91: Usb Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.31 USB port configuration The USB port configuration can be called up by airbrush option USB Port in menu. Con- figuration can be done, if we have USB/RS232 converter. Item Description Baudrate Applied communication speed.

  • Page 92: Usb Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Item Description Keepalive Time Time, after which it will carry out verification of the connection Keepalive Interval Waiting time on answer Keepalive Probes Number of tests Table 71: USB PORT configuration 2 When you select items Use CD as indicator of the TCP connection is activated function indication TCP connection using signal CD (DTR on the router).

  • Page 93: Usb Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 60: USB configuration Example of USB port configuration: Figure 61: Example of USB port configuration 1 Contact www.vitriko.com info@vitriko.com...

  • Page 94: Example Of Usb Port Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Figure 62: Example of USB port configuration 2 Contact www.vitriko.com info@vitriko.com...

  • Page 95: Startup Script

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.32 Startup script In the window Startup Script it is possible to create own scripts which will be executed after all initial scripts. The changes in settings will apply after pressing the Apply button.

  • Page 96: Up/Down Script

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.33 Up/Down script In the window Up/Down Script it is possible to create own scripts. In the item Up script is defined scripts, which begins after establishing a PPP/WAN connection. In the item Down Script is defines script, which begins after lost a PPP/WAN connection.

  • Page 97: Automatic Update Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.34 Automatic update configuration In the window Automatic update it is possible to set automatic configuration update. This choice enables that the router automatically downloads the configuration and the newest firmware from the server itself. The configuration and firmware are stores on the server. To prevent possible manipulation of the update, downloaded file (tar.gz format) is controlled.

  • Page 98: Example Of Automatic Update

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER The following examples find if there is a new firmware or configuration each day at 1:00 in the morning. An example is given on the type of router ER75i v2. Firmware: http://router.cz/er75i-v2.bin...

  • Page 99: User Modules

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.35 User modules Configuration of user modules can be accessed by selecting the User Modules item. It is possible to add new modules, delete them or switch to their configuration. Use the Browse button to select the user module (compiled module has tgz extension).

  • Page 100: Change Profile

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER Continued from previous page Module name Description WMBUS Concentrator Allows to receive messages from WMBUS meters and saves contents of these messages to XML file. pduSMS Sends short messages (SMS) to specified number.

  • Page 101: Change Password

    Figure 73: Set real time clock 1.39 Set SMS service center address For industrial router XR5i v2 is not available Set SMS service center address item. In some cases it is needed to set the phone number of the SMS service centre because of SMS sending.

  • Page 102: Unlock Sim Card

    Figure 74: Set SMS service center address 1.40 Unlock SIM card For industrial router XR5i v2 is not available Unlock SIM card item. Possibility to unlock SIM PIN is under Unlock SIM Card item. If the inserted SIM card is secured by a PIN number, enter the PIN to field SIM PIN and push-button Apply.

  • Page 103: Backup Configuration

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.42 Backup configuration The router configuration is possible to save by help of the Backup Configuration menu item. After clicking on this menu it is possible to check a destination directory, where it will save the router configuration.

  • Page 104: Reboot

    VITRIKO Mobile Data Experts 1. CONFIGURATION OVER WEB BROWSER 1.45 Reboot To reboot the router select the Reboot menu item and then press the Reboot button. Figure 79: Reboot Contact www.vitriko.com info@vitriko.com...

  • Page 105: Configuration Setting Over Telnet

    VITRIKO Mobile Data Experts 2. CONFIGURATION SETTING OVER TELNET 2. Configuration setting over Telnet Attention! If the SIM card isn’t inserted in the router, it is impossible for the router to oper- ate. The Included SIM card must be activated for GPRS transmissions.

  • Page 106: Telnet Commands

    VITRIKO Mobile Data Experts 2. CONFIGURATION SETTING OVER TELNET Continued from previous page Command Description passwd password change ping ICMP ping displaying of processes information dump of actual directory reboot reboot file delete rmdir directory delete route displaying/change of route table...

This manual is also suitable for:

Er75i v2Ur5i v2Lr77 v2

Table of Contents