Advertisement
Quick Links
10. MAINTENANCE AND CLEANING
The following points have to be considered during the inspection:
<1> All screws for installing the devices or parts of the device have to be tightly
and must not be corroded.
<2> There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
<3>Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
<4>The electric power supply cables must not show any damage, material fatigue or sediments.
ending on the installation spot and usage have to be adhered by a
Further instructions dep
skilled installer and any safety problems have to be removed.
CAUTION !
Disconnect from mains before starting maintenance operation.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
<1> Clean the inside and outside lens each week to avoid the weakneness of the lights due
to accumulation of dust.
<2> Clean the fan each week.
<3> A detailed electric check by approved electrical engineer each three month, make sure
that the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under
"Installation instructions".
Should you need any spare parts, please order genuine parts from your local dealer.
Tel: 0086 20 31105974
Email: info@qdot-lighting.com
Website: www.qdot-lighting.com
Sales Office Location: Room 402, Building B, Taoshang City, Nanxin Dajie,
Zip Code: 511400
Factory Location: 2nd-3rd Floor, No.288, Guangzhu East Line, Pingwen, Lanhe Town,
Nansha District, Guangzhou, China
Zip Code: 511473
Qdot Lighting Limited
connected
Qiaonan Road, Panyu District, Guangzhou, China
QB-1010F
EYEBEAM 1010F
KEEP THIS MANUAL FOR FUTURE NEEDS
www.qdot-lighting.com
Version 1.0
Qdot Lighting Limited
Advertisement
Summary of Contents for Qdot QB-1010F
-
Page 1: Maintenance And Cleaning
Never use alcohol or solvents. There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”. Qdot Lighting Limited Should you need any spare parts, please order genuine parts from your local dealer. Tel: 0086 20 31105974 Email: info@qdot-lighting.com... -
Page 2: Safety Instructions
Green in pixel 7 0-255 Green in pixel 7 saturation control(0-100%) 01. SAFETY INSTRUCTIONS Blue in pixel 7 0-255 Blue in pixel 7 saturation control(0-100%) White in pixel 7 0-255 White in pixel 7 saturation control(0-100%) Red in Pixel 8 0-255 Red in pixel 8 saturation control (0-100%) Green in pixel 8... - Page 3 09. DMX CHANNELS 02. UNPACKING Mode/Channel Function Values Description Thank you for choosing our EYEBEAM 1010F. For your own safety, please read this manual before installing the device. This manual covers the important information on 0-255 PAN Movement Pan rotation stop installation and applications.
-
Page 4: Technical Specification
03. TECHNICAL SPECIFICATION 08. MENU OPERATIONS General Details Dmx Address A001~AXXX ● Model No.: QB-1010F Auto Play Auto Run Master/Alone Model Name: EYEBEAM 1010F ● Music Control Master/Alone 10pcs 10W CREE Xlamp XML 4-IN-1 LEDs, RGBW ● Reset On/Off ●... -
Page 5: Photometric Data
07. DMX-512 CONTROL CONNECTIONS DIMENSION Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving head together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors. - Page 6 kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.). 05. OPERATION INSTRUCTIONS Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails. The moving head is for beam effect for on-site decoration purpose.