Download Print this page
HP T1000 G4 Disassembly Instructions Manual
HP T1000 G4 Disassembly Instructions Manual

HP T1000 G4 Disassembly Instructions Manual

Hide thumbs Also See for T1000 G4:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP T1000 G4 NA/JP UPS
HP T1000 G4 INTL UPS
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
PCBA
All types including standard alkaline and lithium coin
or button style batteries Lead-acid battery
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Electrolytic Capacitors
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
2
0
0
0
0
3
2
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP T1000 G4

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Step 1: Disconnect all input and output cords, take off front panel manually and then disconnect the battery wire. Step 2: Uninstall top cover. Take off 8pcs screws by screwdriver EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Step 3: uninstall LCD BOX manually, disconnect the flat wire, and then take off 2pcs screws by screw driver, remove LCD from LCD BOX. EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 5 Step 4: Uninstall battery metal cover by removing screw as below, take out battery pack. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 Step 5: Remove 4 screws on bottom and rear side, disconnect all wires, take off rear panel assy. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 8 EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 9 Step 6: Remove screws as below picture, uninstall inlets, Fan, USB & PCBA. EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 10 EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 11 Step 7: Disconnect wires, remove screws as below showed, take out main PCBA. EL-MF877-00 Page 11 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 12 Step 8: Remove screws and uninstall TX. EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 13 Step 9: Remove screws from bottom and front side, uninstall the plastic battery bracket. EL-MF877-00 Page 13 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 14 Step 10: Take off rubber foot PADS manually. EL-MF877-00 Page 14 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 15 EL-MF877-00 Page 15 Template Revision B PSG instructions for this template are available at EL-MF877-01...