1. Manuals
  2. Brands
  3. Plugwise Manuals
  4. Home Automation
  5. Stick
  6. Installation manual

Plugwise Stick Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Thank you for purchasing this Plugwise kit; the most
advanced system for monitoring and control of your
energy consumption available today. The system is
managed by Plugwise Source, a software application that
communicates with the Circles (the smart plugs) via a
ZigBee wireless network.
The installation process consists of three steps: plugging in the
Circles, installing Source and configuring the system. A detailed
manual for Source will be shown if you click the application's
question mark button.
Installing and configuring your kit can take approximately 45 to 90
minutes.
Contents of the package
Check the content of your package for the following parts. If a
part is missing, please contact us as soon as possible.
1x Stick
license code
Installation list with
software license code
System requirements
In order to install Source you need a computer with at least the
following specifications:
Windows XP/Vista/7
30 MB free disk space
1 GB memory
1x Circle+
Plugwise sticker at the back
with thick black line at the bottom
This manual
1 GHz processor
64 MB graphics card
Internet connection
Circle

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stick and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Plugwise Stick

Summary of Contents for Plugwise Stick

  • Page 1 Thank you for purchasing this Plugwise kit; the most advanced system for monitoring and control of your energy consumption available today. The system is managed by Plugwise Source, a software application that communicates with the Circles (the smart plugs) via a ZigBee wireless network.

  • Page 2: Software Installatie

    Circle+. Ga terug naar uw computer wanneer alle Circles zijn ingestoken en de Ì Carefully tear off the lower code label and stick it in the space on the Ì installatielijst volledig is ingevuld. installation list. It is possible that the codes have already been printed on the installation list.
  • Page 3 When Source has been installed, the Plugwise network configuration Ì wizard will be shown. Stick Plug the Stick into a USB socket on your computer after Source has Ì been installed. Ì When a Windows dialogue box appears with the title ‘unknown manufacturer’, click ‘allow’...
  • Page 4 4. Use tips With Plugwise Source you can measure the energy consumption of each of your appliances and switch the appliances on and off. By sending switching schedules to the Circles you can automatically switch appliances on and off and save on your electricity bill. Your computer can be turned off as energy measurement data and schedules are saved on the Circle’s internal memory.

  • Page 5: Safety Information

    Never discard appliances with household waste; please recycle them at your local facility. 7. Support A detailed manual for Plugwise Source can be viewed by clicking the ‘Help’ button at the bottom right corner of the window. Additionally, for answers to frequently asked questions please visit: www.plugwise.com/en/support/faq...

  • Page 6: Fcc Declarations

    This in particular is applicable for the antenna which has been delivered with the Circle+/Circle/Stick. 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

  • Page 7: Technical Data

    0.375 Connector USB (A) 16 channels Frequency 2400 2483.5 of the 2.4 GHz ISM band Usage and storage temperatures for Circle, Circle+ and Stick Environmental conditions Min. Max. Temperature (operational) 0 ˚C 140 ˚F Humidity (operational, non-condensing) 0 % RH...
  • Page 8 Getting started with Plugwise Installation manual 200.100.110325...

This manual is also suitable for:

Circle+

Table of Contents