Micro SD Card
1.
Remove the rubber cap from the
Micro SD card slot. Then insert the
Micro SD card into the slot.
2.
After inserting the Micro SD card completely, replace the rubber cap.
Note:
Micro SD card is an optional accessory. If the Micro SD card is not
provided in the package, you can buy one yourself.
To remove the Micro SD card, open the rubber cap and press the Micro
SD card gently. Now the Micro SD card will pop up automatically. Then
take it out.
Do not remove the card when it is being used. Removing the card during
an operation may damage the card as well as the E5, and data stored on
the card may be corrupted.
Restoring the Factory Defaults
18