Charge The Battery; Attach The Strap - YI -M1 Instruction Manual

2). removing the lens from the camera
While pressing the lens release button, rotate the
lens in the direction of the arrow.
Remove the lens from the camera
While pressing the lens release button, rotate the
lens counter - clockwise, then you can remove
the lens.

4.Charge the battery

You can use USB cable to charge via adapter or PC. 8.4V/2.4A power adapter is
recommended.
Charging while the battery is in the camera: takes about 3 hours to get fully charged.
Charging with charger: takes about 2.5 hours.
Charging time would depend on battery lifetime and environment conditions.
Also if the battery has not been used for a long time, it would take longer to charge.
27
NOTE: If nothing shows on the camera LCD after connecting the camera to a computer,
the battery may be running out of power already. Please keep the camera connected to
the computer until the battery has charged, then disconnect and connect the camera again.

5.Attach the strap

1
Untighten the screw with a coin Have one side of the strap go through
3
Once the screw is tightened and strap
Tighten the screws rotating riveted straps
is placed, repeat the same steps with
and leather pad
2
the eyelet.
4
28
another side of the strap.