Table of Contents
Advertisement
Thank you for buying handheld two-way radio XM-700. The XM-700 provides cost-effective
communications totally unlicensed for a variety of business and personal communication solutions.
The XM-700 operates on 5 special FCC designated frequencies free for you to use all across the
USA.
Please read this manual carefully in order to know how to properly operate the radio before
use.
Unpacking and Checking Equipment--------------------------------------------------------------1
Parts List ----------------------------------------------------------------------------------------------- 2
Preparation----------------------------------------------------------------------------------------------2
Basic operations----------------------------------------------------------------------------------------3
LCD Icons Instructions-------------------------------------------------------------------------------4
Channel Information ---------------------------------------------------------------------------------5
Optional Items------------------------------------------------------------------------------------------5
VOX ---------------------------------------------------------------------------------------------------7
Battery ----------------------------------------------------------------------------------------------------7
First /Quick Channel -------------------------------------------------------------------------------9
Information Input--------------------------------------------------------------------------------------9
Power On Setting --------------------------------------------------------------------------------------9
Troubleshooting ----------------------------------------------------------------------------------------11
Specification --------------------------------------------------------------------------------------------11
Appendix II CTCSS (Hz) ----------------------------------------------------------------------------11
Appendix III DCS-------------------------------------------------------------------------------------12
Unpacking and Checking Equipment
Welcome to use
·
Please check the packing box of this product and see if there are signs of damage.
·
Please open the packing box carefully. We recommend that you identify the items listed in the
following packing list. if you find that our product and its accessories in handling are lost or
damaged during the shipment. Please immediately contact TEKK dealers.
Parts List
Brief Introduction
Content
-------------------------------------------------------------------------------------8
radios, before using we suggest you:
TEKK
Advertisement
Table of Contents
Related Manuals for Tekk International XM-700
Summary of Contents for Tekk International XM-700
-
Page 1: Table Of Contents
Thank you for buying handheld two-way radio XM-700. The XM-700 provides cost-effective communications totally unlicensed for a variety of business and personal communication solutions. The XM-700 operates on 5 special FCC designated frequencies free for you to use all across the USA. -
Page 2: Parts List
Item Quantity Rubber Antenna Li-ion Battery Pack Desktop Charger Power Adapter Belt Clip User’s Manual Preparation Charging the Battery 1) Using the battery battery is not completely charged at the factory, please charge it before using. To extend the battery life time, please power off the battery when you don't use two way radio, and save battery in a cool (temperature less than 25 ℃... -
Page 3: Basic Operations
150feet. 10. Do not replace charger's power cord. If the power cord damages, you must stop using charger immediately. 3. Charging the Battery Please use the battery charger designated by TEKK to charge battery. After purchase or extended storage (more than two months), the first time to charge battery cannot make battery reach its normal operating capacity. -
Page 4: Lcd Icons Instructions
volume, rotate the volume switch knob counter-clockwise. 3) TX 1. According to different settings of monitor ,please monitor the radio for some while .Ensure there is no radio transmitting at the chosen channel . 2. Press PTT and face to microphone talking . 1) Please make the distance between your lip and microphone at 2.5-5 cm ,and talk as usual to get the best voice quality . -
Page 5: Channel Information
Lower power First Scan Scan Channel No. Menu NO. Signal Level for TX and RX Program Settings Channel Information Radio Basic Information 1) Channels Please choose desired channel number as working channel. 2) Turn On SP Turn on speaker, you can hear sound from radio when it receives correct signaling . Function 1 Optional Items This function can prevent users occupied the present channel for long time and limit TX time,... - Page 6 1.By manual :long press the key with lock icon . 2.Auto-lock: Set time to active auto-lock .It will be invalid when re-turn on radio . 3.Auto-lock + memory : Set time to active auto-lock .It will be valid when turn on radio again.
-
Page 7: Vox
Key Lock Enable the key lock function. UP/DOWN Lock Enable UP/DOWN lock function . VOX level Choose your desired VOX level. VOX Level Comparing Value You can choose 0-180 branch setting in every VOX level for your radio. VOX Delay Time This function helps you to make fluent communication by avoiding quickly back to TX mode without transmitting the last sentence . -
Page 8: Emergency Call
Low Battery Orange Indicator Orange indicator lights when TX at low power. TX Available at Lower Battery Set the certain voltage value to enable radio TX at lower battery (if battery lower than certain value ,radio turns off power automatically ) APO at High Voltage Radio automatically power off if the voltage higher than pre-set voltage value. -
Page 9: First /Quick Channel
Assigned Channel : Suppose assigned at Channel 3 ,no matter what the present channel is ,alarm always goes from Channel 3. Present Channel: Suppose present channel is No.5 ,alarm from Channel 5. Present channel is No.6 ,alarm goes from Channel 6. 7) Emergency Channel NO. -
Page 10: Troubleshooting
scanning. 5) VOX You can turn on/off VOX function. 6) Monitor Your radio can disable/enable monitor CTCSS /DCTCSS, simultaneously will active SQ once receives carrier frequency. 7) Emergency Call You can make an emergency call by programmed key. 9)First Channel You can exchange to first channel by pressing programmed key. -
Page 11: Specification
Verify transmitting is within effective Can not talk to other members of your operating range. group. Verify channel, frequency and code settings are correct. Hearing other conversation Please change code settings, including all channel (not group members’) two way radio settings of your group. CTCSS （Hz, Supported Non-Standard）... - Page 12 Short Press Long Press Key Lock on /off Short Press Instant SQ Cancel Short Press Back Light On Specifications General Specification Device Number(D/N) XM-700 Frequency Range 151.820/151.880/151.940/154.570/154.600MHz Output Power ≤2w Channel 5 channels Channel Spacing 11.25KHz /20KHz CTCSS/DCS 50 CTCSS / 105 DCS...
- Page 13 Compliance with RF Exposure Standards XM-700 complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR §§...
- Page 14 Antenna should be kept away from eyes. • When worn on the body, always place the radio in a Tekk International Inc. approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of Tekk International Inc.
Need help?
Do you have a question about the XM-700 and is the answer not in the manual?
Questions and answers