Table of Contents
Advertisement
4. Always switch the appliance off by setting the control
knob to 0 before you open the lid.
5. To remove the glass jug, just lift it up. You do not have to
screw the glass jug to remove it
Motor Block
• Never immerse the motor block in water or any liquids. Wipe
it with the moist cloth, and then wipe it with a dry cloth again
Tips
•
To prevent spillage, do not put more than 1.5 litres of liquid
in the blender jar, especiallywhen you are processing at a
high speed. Do not put more than 1 litre in the blender
jarwhen you are processing hot liquids or ingredients that
tend to foam.
•
You can use the opening in the lid to add ingredients while
the motor is running.
• Do not process dry ingredients for more than 1 minute.
• Cut solid ingredients into smaller pieces before putting
them in the blender jar. Do notprocess a large quantity of
solid ingredients at the same time. Process these ingredients
in a series of small batches instead.
• If you are not satisfied with the result when blending solid
ingredients, switch the blender off and use the pulse setting
a few times to let the blender run briefly. You can also stir
the ingredients with a spatula (not while the blender is
running!) or remove some of the contents of the jar and
process smaller amounts.
•
To crush ice cubes put max. 5 cubes at a time in the jar and
press the ice button a few times.
Mill
•
The mill can be used for grinding and chopping ingredients
such as peppercorns, sesame seeds, rice, wheat, coconut
flesh, nuts (shelled), coffee beans, soy beans, dried peas,
cheese, breadcrumbs, etc.
•
Always process cloves, star anise and aniseed together with
other ingredients. If processed separately, these ingredients
may attack the plastic materials of the appliance.
•
The mill is not suitable for chopping very hard ingredients
like nutmeg and ice cubes.
•
Do not exceed the maximum level indicated on the mill beaker.
05
Advertisement
Table of Contents
