Related Manuals for EL EL-BL100G
Summary of Contents for EL EL-BL100G
- Page 1 Instruction Manual 2 in 1 Premium Blender with Dry Mill Model: EL-BL100G Before operating this product, please read this instruction manual carefully.
-
Page 2: Technical Information
READ ALL INSTRUCTIONS BEFORE USING THE IRON Features ① Inner cover ② Lid ③ Glass jug ④ Sealing ring ⑤ Cutting blade ⑥ Cup base ⑦ Motor block ⑧ Rotary switch ⑨ Jug assembly ⑩ Ring Technical information Voltage/frequency: 220V 50/60Hz 400W Glass jug capacity: 1.5 liters KB=3MIN... - Page 3 WARNING for your safety ALWAYS READ ALL IMPORTANT SAFEGUARDS AND OPERATING INSTRUCTIONS BEFORE USING THIS BLENDER • Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. • Do not use the appliance if the mains cord, the plug or other parts are damaged.
-
Page 4: Built-In Safety Lock
ELECTRICAL SAFETY WARNING ELECTRICAL PRODUCTS CAN BE DANGEROUS IF NOT USED CORRECTLY. TO AVOID RISK OF FIRE, BURN OR ELECTRIC SHOCK INJURY: ALWAYS: Before using this product, read and familiarize yourself with all instructions. Retain instructions for future reference. Make sure that the voltage indicted on the product corresponds to that of your local standard before connecting to the main power supply. -
Page 5: Before First Use
Before first use • All parts of the blenders are to be thoroughly cleaned for the first time use (refer to “clean” section of this manual) • Take out the desired length of cord from the base and plug into the electric socket Using the appliance Blender •... -
Page 6: Motor Block
4. Always switch the appliance off by setting the control knob to 0 before you open the lid. 5. To remove the glass jug, just lift it up. You do not have to screw the glass jug to remove it Motor Block •... -
Page 7: Preparing The Mill For Use
Preparing the mill for use 1. Put the ingredients in the mill beaker. 2. Screw the mill blade unit clockwise onto the mill beaker. 3. Turn the assembled mill upside down and screw it clockwise onto the motor unit. Using the mill 1. - Page 8 Thank you.