Save All Warnings And Instructions For Future Reference; Important Safety Instructions; Batteries And Chargers; Battery Packs - DeWalt DCR025 Instruction Manual

Heavy-duty bluetooth work site radio/charger
Hide thumbs Also See for DCR025:
Table of Contents

Advertisement

English
DCR025 Heavy-Duty Bluetooth® Work Site
Radio/Charger
The DCR025 Heavy-Duty Bluetooth® Work Site
Radio Charger is an AM/FM radio. The DCR025 can be
powered by 120V AC power source as well as all D
20V Max* and FLEXVOLT
Li-Ion battery packs. Batteries
TM
sold separately.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE

Important Safety Instructions


WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
1 . Read these instructions.
2 . Keep these instructions.
3 . Heed all warnings.
4 . Follow all instructions.
5 . Do not use this apparatus near water.
6 . Clean only with a dry cloth.
7 . Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8 . Do not install near any heat sources such as
radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
9 . Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 . Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 . Only use attachments/accessories specified by
the manufacturer.
12 . Unplug this apparatus during lightning storms or
when unused for long periods of time.
13 . Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
14 . Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus

WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture. Use
only in dry locations.
2

WARNING: To prevent electric shock, match wide
blade of plug to wide slot of outlet.
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ......................... volts
WALT
e
Hz ....................... hertz
min ..................... minutes
or DC ...... direct current
...................... Class I Construction
(grounded)
.../min .............. per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM .................... strokes per minute
A ......................... amperes
W ........................ watts
or AC ........... alternating current

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton.
Before using the battery pack and charger, read the
safety instructions below and then follow charging
procedures outlined. When ordering replacement battery
packs, be sure to include the catalog number and voltage.
Your radio is a D
instructions before using your charger. Consult the chart
at the end of this manual for compatibility of chargers and
battery packs.
READ ALL INSTRUCTIONS
Important Safety Instructions for All

Battery Packs


WARNING: Read all safety warnings and all
instructions for the battery pack, charger and
power tool. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Inserting or removing the battery
pack from the charger may ignite the dust or fumes.
NEVER force the battery pack into the charger. DO
NOT modify the battery pack in any way to fit into
a non-compatible charger as battery pack may
rupture causing serious personal injury. Consult
the chart at the end of this manual for compatibility of
batteries and chargers.
Charge the battery packs only in designated
D
WALT chargers.
e
DO NOT splash or immerse in water or other liquids.
or AC/DC .... alternating or
...................... Class II
n o ....................... no load speed
n ......................... rated speed
...................... earthing terminal
..................... safety alert symbol
..................... visible radiation
..................... wear respiratory
..................... wear eye
..................... wear hearing
..................... read all
WALT charger. Be sure to read all safety
e
direct current
Construction
(double insulated)
protection
protection
protection
documentation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents