Contents Unpacking ............................ 5 Installing Your Washing Machine ....................6 Choosing the Right Location for Your Washing Machine ................ 6 Removing the Transit Bolts ......................7 Hose and Cable Lengths ............................8 Water Supply Hose ..............................9 Water Drain Hose ..............................9 Moving the Washing Machine from One Location to Another ............10 Connecting to the Mains Supply ........................10 Product Overview ........................
Safety Warnings IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING! • If you will not be using the washing machine for a while such as when you go on holiday, turn off the water supply to the washing machine. This is particularly important if there is no drainage around the washing machine.
Page 4
• Check the mains plug regularly for dirt. If dirt accumulates on the mains plug, it could cause a fire. To prevent this, unplug the cable and clean the mains plug with a dry rag. • If you disconnect the mains plug, hold onto the mains plug not the cable. Pulling the cable may damage it causing an electric shock or a fire.
IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING OR REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS. TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF. Unpacking Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
INSTALLATION Installing Your Washing Machine Please read and follow the instructions carefully. • In addition to the instructions mentioned here, special regulations may apply with regards to the relevant water and power supply companies. If in doubt, have the washing machine connected by a qualified technician.
INSTALLATION Removing the Transit Bolts Four (4) transit bolts keep the interior of the washing machine in place while it is being moved. They must be removed before installation. Use a 10mm spanner (not included) and follow the instructions. Do not run the washing machine without removing the bolts, as this can cause excessive vibrations. To remove the transit bolts: 1.
INSTALLATION Hose and Cable Lengths How to connect from the left side How to connect from the right side ~95cm ~140cm Program C510WM14 ~145cm ~95cm COTTON SYNTHETICS DELICATE WOOL 90° 90° 30° 30° 60° pre 60° cold 60˚C 40˚C 60˚C 40°...
INSTALLATION Water Supply Hose Points to remember • Follow the instructions in this section to avoid water leaks. • Don’t connect the hose to a combination tap. • Don’t twist, squash, modify or cut the hose. • Optimum water pressure in the main pipe is 0.1 MPa - 1.0 MPa. If the water pressure is set higher than this, you will need to install a depressurising valve.
INSTALLATION Connecting to the Mains Supply For your safety: • Do not use a mains plug adapter or extension cable. • If the mains cable or mains plug are damaged, stop using them and call a qualified technician for assistance. •...
Product Overview The unit The Detergent The Control Compartment Panel Door Window Drain Hose Pump filter cover C510WM14_S14_IB.indd 11 10/02/2014 16:35...
Control Panel Start / Pause Program Selection Dial Press to start your wash. Different wash programs Press while in operation can be selected according to to pause your wash. your wash requirements. Program Ready Light Lights to show a program has been selected and is ready.
Preparation Read the following to understand how best to prepare your laundry for washing. Preparing Laundry • Check that pockets do not contain any objects which may damage your clothes and the washing machine. • To prevent any large, heavy objects (e.g., buckles, large buttons, etc.) from hitting the glass door, turn your clothing inside out, or remove the heavy objects.
• For pre-washing program, detergent should be added to both drawer . For other programs, do not add detergent to drawer • Use liquid detergent according to the instructions on its package. Do not use liquid detergent in the pre-wash mode. •...
Selecting the Program Here are the available programs, additional functions and option settings. Preset Setting Max Load Program Description Prewash Default Spin Approximate Temperature (kg) Function † (rpm) Time (Min) 90°C Available 90°C 5.0* 1000 ✓ 60°C Pre † Pre set 60°C 5.0* 1000...
Wash Setting Standard Washing 1. Pull the door handle and put the laundry in the drum. Make sure no washing gets caught in the door. 2. Close the door and turn the Program Selection Dial to select your wash program. The program ready light will switch on.
Maintenance - Cleaning the Washing Machine • Always unplug the washing machine before cleaning. Maintenance Wash Regularly (recommended 2-3 months) run your washing machine on a 90°C program with a little detergent and NO LAUNDRY. You MUST make sure the drum is empty. This will clean the inside of the machine and remove any bad odours.
Cleaning the Door Seal and Window • Wipe the window and seal after each wash to remove lint and stains. If lint builds up, it can cause leaks. • Remove any coins, buttons and other objects from the door seal after each wash. Cleaning the Drain Pump Filter Its recommended to clean the pump filter every 2-3 months.
Troubleshooting Troubles Reason Solution • Check that the door is closed tightly. • Check that the power is on. Washing machine • Check that the water supply tap is open. cannot start up • Check a program is selected. • Check that the Start/Pause button is pressed.
The reason for such spots may allowed according to the detergent on the laundry. be oil, cream or ointment. manufacturer in your next wash. Specifications Model C510WM14/C510WMS14 Rated Voltage 230 - 240V~ Rated Frequency 50 Hz Maximum Energy Rated Power Input 2100 W...
Product Fiche Brand: Currys Essentials Model: C510WM14/C510WMS14 Rated capacity: 5 kg Energy efficiency class: A+ Energy consumption is 167 kwh per year based on 220 standard washing cycles for cotton programs set at 60° C and 40° C, at full and partial loads, and the consumption of the low-power modes.
Page 23
For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. DSG Retail Ltd. (co. no. 504877), Maylands Avenue, Hemel Hempstead Herts, HP2 7TG, UK IB-C510WM14/WMS14-140210V1 C510WM14_S14_IB.indd 23 10/02/2014 16:35...
Need help?
Do you have a question about the C510WM14 and is the answer not in the manual?
Questions and answers