GENERAL INFORMATION Congratulations on the purchase of your new 147 Preamp Pedal! Our preamp pedals are the result of an uncompromising dedication to meticulous craftsmanship and a commitment to create unparalleled performance for our customers. This pedal may look like a typical stomp box, but it’s a preamp for the legendary Leslie rotary speaker cabinets.
Page 3
User’s Guide FRONT PANEL 1. GAIN: Control overall level of the output for the preamplifier. 2. TONE: Attenuate the high frequencies. 3. SPEED LIGHT: The speed light indicator will turn green when the speed switch is set to fast, the indicator will turn red when the speed is switched to slow.
Page 4
However, if your preamp requires repair or maintenance for any reason, please reach out to Analog Outfitters for help before going to another technician. Email info@analogoutfitters.com or call 217.954.1805 for any questions or concerns. For any questions or concerns, please contact Analog Outfitters: info@analogoutfitters.com | 217.954.1805 | www.AnalogOutfitters.com...
Need help?
Do you have a question about the 147 Leslie and is the answer not in the manual?
Questions and answers