Table of Contents
Related Manuals for Ronda 200H
Summary of Contents for Ronda 200H
- Page 1 USER MANUAL (Original) (Country code EU ; CH ; DK ) IMPORTANT! Read this manual before you start using the vacuum cleaner. â RONDA 200H â RONDA 200H-S Handy Industrial Vacuum Cleaner for Fine Dust and Dust Hazardous to Health...
- Page 2 User Manual â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S...
-
Page 3: Table Of Contents
UST HAZARDOUS TO EALTH AND SBESTOS CLEANING AND MAINTENANCE..........................23 MAINTENANCE OF THE MOTOR TOP ........................23 CHANGE OF FILTERS ..............................24 ..................................24 ENERAL Disposal of Used Filters..............................26 TROUBLESHOOTING ...............................27 DECLARATION OF CONFORMITY..........................28 SERVICE AND REPAIR..............................29 â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... - Page 4 User Manual â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S...
-
Page 5: General Description
Keep the manual readily accessible to all users. â â RONDA 200H / RONDA 200H-S is an industrial vacuum cleaner developed for the collection of very fine and â â health hazardous dust. RONDA 200H / RONDA 200H-S meets the requirements for vacuum cleaners within the industry and the construction industry today. -
Page 6: Safety Precautions
â RONDA 200H / RONDA 200H-S must be connected to 230 V power supply. Make sure that the voltage · and safety fuse of the power supply correspond with the data of the data plate and the information given in this manual. -
Page 7: Guidelines In Connection With Disposal Of The Machine
WEEE collection facilities in the disposition of this product and otherwise observe all applicable national requirements. Does the safe use or maintenance of the appliance raise any questions, do not hesitate to contact either your dealer or V. BRØNDUM A/S. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 8: General Safety Instructions
Choose a safe working position so that there will be no risk of falling in the hose and cord. Keep the machine and equipment in good repair. Keep the vacuum cleaner clean and dry and follow the instructions of the chapter about â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... - Page 9 Do not use the vacuum cleaner, if it cannot be started and/or stopped at the switch. â â RONDA 200H / RONDA 200H-S is H-classified in accordance with the demands of EN 60335-2-69 Annex AA for collection of dust hazardous to health. â â RONDA 200H /RONDA 200H-S is furthermore in accordance with the Machinery Directive (2006/42/EC).
-
Page 10: Technical Data
â â RONDA 200H / RONDA 200H-S is connected to 230 V power supply. â â The survey below shows the technical data of RONDA 200H & RONDA 200H-S A169 Voltage Volt Suction motor 1100 1100... -
Page 11: Standard Accessories
â â RONDA 200H / RONDA 200H-S is delivered with a complete set of accessories including tubes, hose and all the necessary nozzles. You can reorder the accessories using the following product numbers: 1. 40 mm professional’s set ............80.33.4037 2. -
Page 12: Applications
RONDA 200H / RONDA 200H-S may only be used in dry environments and may not be used or stored outdoors or indoors under wet conditions. The capacity of a vacuum cleaner to suck vacuum depends on the air. Theoretical the suction capacity will fall when the vacuum cleaner is used at altitudes. -
Page 13: Description Of The Main Parts
â RONDA 200H / RONDA 200H-S is designed as a handy and compact industrial vacuum cleaner for collection of fine dust and dust hazardous to health. Motor Top with Suction Motor and HEPA Filter The motor top is equipped with suction motor, an integrated handle, switches for the suction motor and the built-in automatic start-/stop. -
Page 14: Collection Container With Multi-Tube Filter
User Manual Collection Container with Multi-Tube Filter â The large multi-tube filter of the RONDA 200H / RONDA ® 200H-S is mounted directly in the collection container. The surface of the filter of 8000 cm is coated with Teflon. The Teflon coating repels the dust, which will in this way not stick so easily to the filter material. -
Page 15: Mode Of Operation
MUST be mounted and intact. IMPORTANT! Never cover up the motor top when the machine is in use. IMPORTANT! Never collect warm or glowing materials. IMPORTANT! Never extract from processes producing sparks. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 16: Assembling
· Remember to place the label onto the H-label, if the language of the user is not German. â â · RONDA 200H / RONDA 200H-S is now ready for use. The collection is described in details in the following chapter. â â RONDA... -
Page 17: Collection Of Dry Dust
â â RONDA 200H / RONDA 200H-S is equipped with an automatic start/stop and electrical outlet. If you connect â electrical hand tools directly to the power outlet of the motor top, the RONDA 200 will automatically be switched on and off when the hand tools are switched on and off. - Page 18 ALWAYS TURN OFF the hand tool before you turn off the machine on the switch. Separate extraction (RONDA 200H-S) If the machine is equipped with a separate exhaust coupling, a hose must be used for the air exhausted.
-
Page 19: Cleaning Of The Multi-Tube Filter During Operation (As Needed Or When The Alarm Beeps)
NOTE: Do not ”tap” on the intake as this will swirl up the dust in the container and result in blocking of the multi- tube filter. Therefore ALWAYS use the shock valve for cleaning of the multi-tube filter during operation. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 20: Emptying
The RONDA 200H / RONDA 200H-S can collect the material, depending on the character of the material, directly in the collection container or in a filter bag (if collecting dust hazardous to health a filter bag must be used). If the machine has been used without filter bag immediately before the emptying, it is recommended to wait a few minutes with the emptying to allow the fine dust to fall to the bottom of the collection container. -
Page 21: Reordering Of Filter Bags
The machine must be emptied, cleaned and packed before transport. Mark the packing according to the national regulations. The machine must be transported in a min. 120 μm plastic bag or other tight-fitting packing. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 22: Cleaning And Maintenance
Check of cord, plugs and outlet for tools Before use Check of alarm (beeper) Before use Reordering of filters and service parts Brushes 81.73.176B Multi-tube filter 84.67.1111 HEPA filter 84.67.5006 Collection bags 84.64.0033 â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 23: Change Of Filters
· Loosen the four container clips of the motor top and remove the motor top. Place the motor top so that the filter is easily accessible. In order to ensure a dust-free emptying when the HEPA filter is replaced, the following procedure must be followed: â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... - Page 24 Pull a plastic bag (100 μm or the like) over the filter. Pull the filter free of the bolt. Do not TUG or twist the filter as this may damage the bolt. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S...
-
Page 25: Disposal Of Used Filters
Mount the washer and the nut. Tighten with approx. 25nM. Disposal of Used Filters When you dispose of the used filters you must make sure that this is done according to the national regulations. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 26: Troubleshooting
The hand tool starts but the machine does not start à The fuse may have melted · The replacement must be made by V. BRØNDUM A/S, an authorized V. BRØNDUM A/S dealer or a similarly qualified person in order to avoid hazards. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S... -
Page 27: Declaration Of Conformity
“H” . Model: â â RONDA 200H / RONDA 200H-S has been designed and produced in conformity with the basic requirements and other relevant conditions of the following directives: The Machinery Directive (Directive 2006/42/EF) The compliance has been achieved by use of the following standards: EN 60 335-2-69 Verified compliance with standard and directive by: SLG. -
Page 28: Service And Repair
The machine is handed in via the V. BRØNDUM A/S dealers or is sent directly, carriage paid, to: V. BRØNDUM A/S Sadolinsvej 14-16 DK-8600 Silkeborg Tlf. (+45) 8682 4366 Fax (+45) 8680 3363 E-mail v@broendum.com Subject to changes. â â RONDA 200H (RONDA 200H-S) V. BRØNDUM A/S...
Need help?
Do you have a question about the 200H and is the answer not in the manual?
Questions and answers