Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FORS ML6351
Summary of Contents for FORS ML6351
- Page 1 User Manual Washing Machine ML6351...
-
Page 2: Table Of Contents
CONTENTS Safety information Before first use Safety instructions Daily Use Product description Hints and tips Control panel Care and cleaning Programme Chart Troubleshooting Consumption values Technical Data Options Guarantee Conditions Settings Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. -
Page 3: Safety Instructions
The operating water pressure (minimum and maximum) • must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa). The ventilation openings in the base (if applicable) must not • be obstructed by a carpet. The appliance is to be connected to the water mains using •... -
Page 4: Product Description
• Do not touch the mains cable or the • Use this appliance in a household only. mains plug with wet hands. • Obey the safety instructions on the • Do not pull the mains cable to detergent packaging. disconnect the appliance. Always pull •... -
Page 5: Control Panel
CONTROL PANEL Control panel description On/Off button (Ein/Aus - Marche/Arrêt) Liquid detergent button (Flüssig Dosierung - Lessive Liquide) Programme knob Stain button (Flecken - Taches) Display Spin reduction button ( Schleudern - Start Pause button (Start/Pause - Essorage) Départ/Pause) Temperature button (Temperatur - Delay start button (Zeitvorwahl - Départ Température) Différé) -
Page 6: Programme Chart
Spin area: Spin speed indicator No Spin indicator Rinse Hold indicator 1) Only available for Spin/Drain programme. Display indicators: Washing phase Rinses phase Spin phase Child safety lock Extra rinse Lid locked Delay start Time area: Programme duration Delay start Alarm codes Message of error Programme is completed... - Page 7 Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed Koch/Bunt - Blanc/ 6 kg White cotton and coloured cotton. Normal soil and Couleurs 1300 rpm light soil. 95°C - Cold Koch/Bunt + Vor- 6 kg White cotton and coloured cotton.
- Page 8 Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed Schnell Intensiv - 5 kg Quick washing programme for white/fast colour Intensif 1200 rpm cottons and mixed fabrics with light soil level. 60°C - 40°C 20 min.-3kg 3 kg Cottons and synthetics items with light soil level...
- Page 9 Programme options compatibility Programme Flüs Zeit Zeit Flec vor- leu- ier- Spü Dé- Rin- part sor- sive çag Dif- Liq- féré Koch/Bunt - Blanc/ ■ ■ ■ ■ ■ ■ ■ Couleurs Koch/Bunt + Vorwäsche - Blanc/Couleurs + Prél- ■ ■...
-
Page 10: Consumption Values
Programme Flüs Zeit Zeit Flec vor- leu- ier- Spü Dé- Rin- part sor- sive çag Dif- Liq- féré Baumwolle Eco - Coton ■ ■ ■ ■ ■ ■ ■ 1) The Stain option is not available with a temperature lower then 40°C. 2) If you set Extra Rinse option, the appliance adds some additional rinses. -
Page 11: Options
Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Koch/Bunt - Blanc/ 0,65 Couleurs 40 °C Pflegeleicht - Syn- 0,45 thétiques 40 °C Feinwäsche - Déli- 0,55 cats 40 °C Wolle/Seide - 0,35... -
Page 12: Settings
• The lid stays locked. You must drain the Use this option for persons allergic to water to unlock the lid. detergents and in areas where the water is soft. • The display shows the indicator The related indicator comes on. To drain the water refer to ‘At the end of the programme’. -
Page 13: Before First Use
Permanent Extra Rinse Dosierung - Lessive Liquide at the same time until the indicator Extra Spülen - With this option you can permanently have Rinçage + comes on/goes off. an extra rinse when you set a new programme. • To activate/deactivate this option press Flecken - Taches and Flüssig BEFORE FIRST USE 1. - Page 14 Detergent compartments CAUTION! Use only specified detergents for washing machine. Always obey the instructions that you find on the packaging of the detergent products. Detergent compartment for prewash phase. The marks MAX are the maximum levels of the quantity of detergent (powder or liquid).
-
Page 15: Setting A Programme
• Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level. Setting a programme Behaviour of the appliance 1. -
Page 16: Cancelling A Programme
The related indicator flashes. To open the door proceed as follows: 2. Press button Zeitvorwahl - Départ 1. Press the button Ein/Aus - Marche/Arrêt Différé repeatedly until the display for some seconds to deactivate the shows . appliance. 3. Press button Start/Pause - Départ/ 2. -
Page 17: Hints And Tips
Draining water out after end of AUTO Stand-by option cycle The AUTO Stand-by option automatically deactivates the appliance to decrease the The washing programme is completed, energy consumption when: but there is water in the drum: • You do not use the appliance for 5 The drum turns regularly to prevent the minutes before you press Start/Pause - creases in the laundry. -
Page 18: Care And Cleaning
Detergents and additives Ecological hints • Only use detergents and additives • Set a programme without the prewash specially made for washing machines: phase to wash laundry with normal soil. – powder detergents for all types of • Always start a washing programme with fabric, the maximum load of laundry. -
Page 19: Cleaning The Detergent Dispenser
Cleaning the detergent dispenser Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. - Page 20 Cleaning the inlet hose and the valve filter...
-
Page 21: Troubleshooting
90˚ Emergency drain WARNING! Make sure that the temperature is more than 0 °C Because of a malfunction, the appliance before you use the appliance cannot drain the water. again. The manufacturer is not If this occurs, do steps (1) through (5) of responsible for damages caused 'Cleaning the drain filter'. - Page 22 water tap. Contact the Authorised • - The appliance lid or drum doors Service Centre. are open or not closed correctly. Please check both! WARNING! Deactivate the appliance before you do the • - The mains supply is unstable. checks. Wait until the mains supply is stable.
- Page 23 Problem Possible solution Set the drain programme if you set an option which ends with wa- ter in the tub. The spin phase does not Set the spin programme. operate or the washing cycle lasts longer than usually. Make sure that the drain filter is not clogged. Clean the filter, if nec- essary.
-
Page 24: Technical Data
We would like to congratulate you on your The following conditions apply to the warranty: purchase of a FORS product. You have made a good choice and selected a 1. The warranty covers appliances which product of extremely high quality, which... -
Page 25: Environmental Concerns
6. Replaced parts shall become the property of FORS AG and are to be returned immediately upon request. 7. Removing or rendering unrecognisable the appliance’s original serial number,... - Page 28 FORS AG/SA Schaftenholzweg 8 2557 Studen Tel. 032 374 26 26 Fax. 032 374 26 70 info@fors.ch www.fors.ch 108895600-A-162014...
Need help?
Do you have a question about the ML6351 and is the answer not in the manual?
Questions and answers