EyeRIS IX-Series Quick Start Guide For any further support e-mail us : support@cybernetyx.com Components for Standard Mount Setup Freude an Technik EyeRIS v3.1 Installing EyeRIS Standard Mount on Whiteboard Setup Installing EyeRIS Standard Mount on Wall Setup 1 inch Projection Area...
Page 2
Installing EyeRIS TOUCH v2.0 on Whiteboard 1 inch Projection Area 1 inch 1 inch Double Magnets Sided Tape 1 inch Screws Installing EyeRIS TOUCH v2.0 on Wall 1 inch Projection Area Screws Connectivity Gear A Gear B Laser TOUCH 2.0 Important...
Page 3
Components for Universal Mount Setup Freude an Technik EyeRIS v3.1 Installing EyeRIS on UST/ST Projector with Universal Mount Note: Use the holes provided for fixing projector EyeRIS & TOUCH Setup on Whiteboard and Wall 1 inch 1 inch Projection Area Projection Area 1 inch 1 inch...
Page 4
Auto Calibration of EyeRIS Align TOUCH Registered Offices : Cybernetyx Interaktiv UG (haftungsbeschränkt) Friedrichstraße 15A, 31737 Rinteln, Germany Phone: + 49 162 342 8337...
Need help?
Do you have a question about the EyeRIS IX-Series and is the answer not in the manual?
Questions and answers